In Stock

Non-Contact High Voltage Detector Model 275HVD (240V to 275kV, Manual self-test)

Available for Quote

The Model 275HVD is designed to detect the presence of high voltage without physical contact. An 8 position rotary switch selects the detection range. As the sensor is moved closer to the voltage carrying conductor, its sensor head picks up the radiated electric field. Once the threshold is reached, the buzzer sounds and a bright red warning light alerts the operator of live conductors. The Model 275HVD is powered by three standard Alkaline C cell batteries and can be used both in- and out-of-doors. A universal spline on the back-end facilitates attachment to any standard hot stick. A self-test position ensures that all circuitry and annunciators are working properly before use.

View List
SKU: N_AEMC 275 HVD Category: Tag:

Quick Comparison

SettingsNon-Contact High Voltage Detector Model 275HVD (240V to 275kV, Manual self-test) removeAEMC 6416 Ground Resistance Tester removeClamp-on Meter Model 675 (Dual Display, TRMS, AC/DC Amps & Volts, Ohms, Continuity, Frequency & Temperature) removeAEMC 6527 4G Ohm, 250V/500V/1000V Digital Megohmmeter removeClamp-on Meter Model 403 (TRMS, 1000VAC/DC, 1000AAC/1500ADC, Ohms, Continuity, Temperature) removeClamp-on Leakage Current Meter Model 566 remove
Image
SKUN_AEMC 275 HVDN_AEMC 6416N_AEMC 675N_AEMC 6527N_AEMC 403N_AEMC 566
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionThe Model 275HVD is designed to detect the presence of high voltage without physical contact. An 8 position rotary switch selects the detection range. As the sensor is moved closer to the voltage carrying conductor, its sensor head picks up the radiated electric field. Once the threshold is reached, the buzzer sounds and a bright red warning light alerts the operator of live conductors. The Model 275HVD is powered by three standard Alkaline C cell batteries and can be used both in- and out-of-doors. A universal spline on the back-end facilitates attachment to any standard hot stick. A self-test position ensures that all circuitry and annunciators are working properly before use.Clamp-on Meter Model 675 is a general purpose professional instrument that measures up to the toughest standards. This meter offers a complete set of measurement ranges, AC and DC current, AC and DC voltage, resistance, continuity with beeper, frequency from V or A, and temperature. It is in compliance with international safety and quality standards to ensure professional and reliable measuring tools. This meter is designed to measure and display amps and volts at the same time. It also is auto-ranging and provides the best measurement range and resolution for troubleshooting.
ContentThe Ground Resistance Tester Model 6416 measures ground rod and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6416 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured.
Weight93.59299
Dimensions5 × 5 × 5 in12 × 5 × 5 in6 × 6 × 12 in10 × 5 × 5 in6 × 6 × 12 in6 × 6 × 12 in
Additional information
Weight 9 lbs
Dimensions 5 × 5 × 5 in
Weight 3.5 lbs
Dimensions 12 × 5 × 5 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 2 lbs
Dimensions 10 × 5 × 5 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in