In Stock

AC Line Splitter Model ALS-1

Available for Quote

The AC Line Splitter Model ALS-1 increases the sensitivity of clamp-on current probes and clamp-on meters. The Model ALS-1 provides temporary separation of conductors (avoiding splitting of the line) to facilitate measurement of current. Simply plug the Model ALS-1 into a connector for a safe measurement. Two clamp positions are available: X1 for direct readings, and X10 for actual reading multiplied by 10. Also features voltage checking.

View List
SKU: N_AEMC ALS-1 Category: Tag:

Quick Comparison

SettingsAC Line Splitter Model ALS-1 removeCalibration of AEMC 6418 Ground Resistance Tester NIST Calibration with Certificate removeClamp-on Meter Model 403 (TRMS, 1000VAC/DC, 1000AAC/1500ADC, Ohms, Continuity, Temperature) removeAEMC 6418 Ground Resistance Tester removePower Clamp-on Meter Model 205 (TRMS, 1000VAC/DC, 600AAC/900ADC, Ohms, Continuity, Phase Rotation, Power, THD) removeDigital FlexProbe® Model 4000D-14 w/6' Lead (TRMS, 40AAC, 400AAC, 4000AAC) remove
Image
SKUN_AEMC ALS-1C_AEMC 6418N_AEMC 403N_AEMC 6418N_AEMC 205N_AEMC 4000D-14
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Instant Quote

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionThe AC Line Splitter Model ALS-1 increases the sensitivity of clamp-on current probes and clamp-on meters. The Model ALS-1 provides temporary separation of conductors (avoiding splitting of the line) to facilitate measurement of current. Simply plug the Model ALS-1 into a connector for a safe measurement. Two clamp positions are available: X1 for direct readings, and X10 for actual reading multiplied by 10. Also features voltage checking.All equipment calibrations do not include any equipment warranty. Equipment that has any visible sign of damage will be documented and the customer will be notified before any services are performed. Any needed repairs will be quoted separately. All of our items will ship with Warranty Void tamper resistant seals. If these seals have been removed or tampered with, the Calibration will be void.
ContentThe Ground Resistance Tester Model 6418 measures ground rod, busbar, and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6418 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured.
Weight2393.596
Dimensions5 × 5 × 5 in6 × 10 × 4 in6 × 6 × 12 in12 × 5 × 5 in6 × 6 × 12 in6 × 6 × 12 in
Additional information
Weight 2 lbs
Dimensions 5 × 5 × 5 in
Weight 3 lbs
Dimensions 6 × 10 × 4 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 3.5 lbs
Dimensions 12 × 5 × 5 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 6 lbs
Dimensions 6 × 6 × 12 in