| Description | | 195W, 4ch Output DC Programmable Power Supply
4 Outputs for GPD-4303S
High Resolution Display 1mV / 1mA (GPD-X303S)
CH1/CH2 Output: 30V / 3A
CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S)
CH4 Output: 5V / 1A (GPD-4303S)
Auto Series / Parallel Tracking Mode
Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight
4 Sets SAVE / RECALL panel setting
User Friendly Operation, Coarse and Fine Voltage Control
Warring Buzzer
Output On / Off Switch
USB Device for Remote Control (Baud Rate 115200 bps Maximum)
Free downloadable PC software
Smart Cooling Fan with Low Noise
Safety Design: Reverse Polarity, Overload Protection | | | Measurement Capability
- 6½ digit resolution
- 10 measurement functions: DC/AC voltage, DC/AC current, 2- and 4-wire resistance, diode, continuity, frequency, period
- Basic accuracy: 0.0035% DC, 0.06% AC
- 1000 V max voltage input, 3 A max current input
| 330W DC Linear Power Supply 0-110V, 0-3A
0-110V, 0-3A
0.01% High Regulation
Constant Voltage and Constant Current Operation
Internal Select for Continuous or Dynamic Load
Low Ripple and Noise
Overload and Reverse Polarity Protection
3 1/2 Digit 0.5" LED Display |
| Content | | | The Instek GDS-200/300 series handheld oscilloscope features two analog input channels and is available with 70, 100 or 200 MHz bandwidth. It features a 7" capacitive full touch panel LCD which can be positioned in portrait and landscape display, as well as a rechargeable battery making it easy to operate in field operation. The GDS-200/300 are ideal for use in laboratories, R&D, solar power inspection and repair, and for maintenance personnel who are always on field assignments. | GW Instek launches a new series of desktop battery tester, the GBM-3000 series, which uses AC 1kHz as the test signal and measures battery's voltage and internal resistance to 300V (GBM-3300) and 80V (GBM-3080). The series features 3.5" TFT LCD, 4-wire measurement method, high-resolution (6-digit voltage / 5-digit resistance) measurement display capability, and independent GO/NOGO determination of voltage and resistance, various communications interfaces, etc. to meet various types of battery measurements, ranging from single cell, battery cell, to the end product (battery), etc. so as to facilitate users in achieving accurate measurements at all stages of production. | | |
| Additional information |
| Weight |
8 lbs |
| Dimensions |
17.5 × 13.5 × 7.5 in |
|
| Weight |
18 lbs |
| Dimensions |
22 × 15 × 12 in |
|
| Weight |
5 lbs |
| Dimensions |
11.5 × 11.1 × 5.6 in |
|
| Weight |
8 lbs |
| Dimensions |
20 × 15 × 13 in |
|
|
| Weight |
15 lbs |
| Dimensions |
18 × 12 × 10 in |
|
