In Stock

Pomona 5173-0 Do-It-Yourself Brass Pin Tip Plug with Flexible Boot, Solder or Crimp, 0.080″ Diameter, Black

Available for Quote

View List
SKU: N_Pomona 5173-0 Categories: , Tag:

Quick Comparison

SettingsPomona 5173-0 Do-It-Yourself Brass Pin Tip Plug with Flexible Boot, Solder or Crimp, 0.080" Diameter, Black removePomona 72913-0 Banana Jack, 36A, Solder, Black removeAmprobe TL36A Test Leads with Alligator Clips, 1000V removeAmprobe PM55A Pocket Multimeter with VolTect Non-Contact Voltage Detection removeAmprobe AF-600 A-Frame Cable Ground Fault Locator removeAmprobe MLS55-3 Pipe Transmitter for AT-3500 remove
Image
SKUN_Pomona 5173-0N_Pomona 72913-0N_Amprobe TL36AN_Amprobe PM55AN_Amprobe AF-600N_Amprobe MLS55-3
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
ContentThe Amprobe TL36A test lead set contains two PVC lead wires with two threaded probe tips and two threaded alligator clips for connecting a compatible electrical test meter to a device in electrical testing applications. The 48" lead wires have silicone insulation to protect hands from shock and heat. The silicone insulation resists melting in hot environments and becoming brittle in cold ones, and it maintains flexibility better than polyvinyl chloride (PVC) insulation. The lead wires have standard probe tips that are held against the conductor during testing. The alligator clips (also called crocodile clips) screw onto the probe tips and have teeth that grip the conductor to provide a more secure, hands-free connection than the test probe tips. The clips are 2.67" long and have a 0.30" jaw opening. The probe tips and the included alligator clips are threaded, allowing for a more secure connection than non-threaded tips and clips. The lead wires can be used with testing devices that have universal 4 mm jacks. The kit meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 1,000V, which covers items used with enclosed building circuit installations (service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply). It also conforms to applicable European Conformity (CE) directives.The Amprobe PM55A is the ultimate pocket-sized multimeter. Only 3/8? thick and less than 3 oz in weight with full functionality offering AC and DC voltage measurement to 600 V, AC and DC current to 2000 ?A, resistance to 6 Megohm, capacitance to 2000 ?F, frequency to 30 kHz, diode test and continuity with beeper. It also offers VolTect?, a built-in, non-contact voltage detection feature for AC voltages.The AF-600 A-Frame cable ground fault finder is specifically designed for the Amprobe UAT-600 Underground Utilities Locator Series. In combination with the UAT-600 Transmitter, it will pinpoint the place where a cable metal conductor (either a sheath or a metallic conductor of the wire) touches the ground. It can also detect other conductors to ground faults such as pipeline coating defects.The Amprobe MLS55-3 Pipe transmitter is an optional accessory for the AT-3500 underground cable locator that allows for pinpointing places in pipes, ducts, etc. It can be inserted to the pipe/duct using standard fish tape or a duct rodder and can accommodate pipes over 2? (5 cm) in diameter.
Weight0.30.51151
Dimensions6 × 4 × 6 inN/A3 × 2 × 6 in4 × 10 × 2 in14 × 6 × 10 in7.1 × 5.3 × 3.7 in
Additional information
Weight 0.3 lbs
Dimensions 6 × 4 × 6 in
Weight 0.5 lbs
Weight 1 lbs
Dimensions 3 × 2 × 6 in
Weight 1 lbs
Dimensions 4 × 10 × 2 in
Weight 5 lbs
Dimensions 14 × 6 × 10 in
Weight 1 lbs
Dimensions 7.1 × 5.3 × 3.7 in