GWInstek GDS-3000 Series Digital Storage Oscilloscopes

GDS-3000 Series Digital Storage Oscilloscopes

Features

500/350/250/150MHz with 2/4 Channels
5GSa/s RT or 100GSa/s ET Sampling Rate
Independent Memory for Each Channel
VPO Technology
Large 8-inch 800×600 Display
Split Screen Function
3 Built-in Impedances (50Ω/75Ω/1MΩ)
Power Analysis Software (Optional)
Serial Bus Analysis Software for I2C, SPI and UART (Optional)

Description

Specifications

Accessories

Ordering Info

Description

A Hi-tech DSO Platform

The GDS-3000 Series is a platform of 4-input channels, 500MHz bandwidth, 5GSa/s sampling rate, and VPO waveform display. The split screen feature has been designed to meet the requirements of multi-window & multi-signal tests in the research and the manufacturing fields. The optional power analysis software and the optional serial bus analysis software are available to facilitate the engineer’s tasks in testing and manufacturing of the associated products.

The differential probe, GDP-025, GDP-050 & GDP-100, and current probes, GCP-020, GCP-100 and GCP-530 & GCP-1030, are coming along with the GDS-3000 Series to provide total solutions for a wide variety of applications in the industry, service and education market sectors. The GDS-3000 Series, a high-tech platform carrying thoughtful features, brings very high customer value to both general purpose market and professional market.

Specifications

Manufacturer Specs

Model	GDS-3152	GDS-3154	GDS-3252	GDS-3254	GDS-3352	GDS-3354	GDS-3502	GDS-3504
Vertical
Input Channels	2Ch+EXT	4Ch+EXT	2Ch+EXT	4Ch+EXT	2Ch+EXT	4Ch+EXT	2Ch+EXT	4Ch+EXT
Bandwidth	DC~150MHz(-3dB)		DC~250MHz(-3dB)		DC~350MHz(-3dB)		DC~500MHz(-3dB)
Rise Time	2.3ns		1.4ns		1ns		700ps
Vertical Resolution	8 bits
Vertical Resolution@ 1MΩ	2mV~5V/div
Vertical Resolution@ 50/75Ω	2mV~1V/div
Input Coupling	AC, DC, GND
Input Impedance	1MΩ// 16pF
DC Gain Accuracy	+(3% X \|reading\| + 0.1div+ 1mV)
Polarity	Normal and inverted
Maximum Input Impedance @1MΩ	300V (DC+AC peak), CAT I
Maximum Input Impedance @50/75Ω	5 Vrms ,CAT I
Offset Position Range	2mV/div ~ 100mV/div: 0.5V 200mV/div ~ 5V/div: 25V
Bandwidth Limit	20MHz (-3dB)		100MHz (-3dB)		200MHz (-3dB)		20MHz/ 100MHz/ 200MHz/ 350MHz (-3dB)
Waveform Signal Processing	Addition, Subtraction, multiplication, division, FFT, FFTrms
Trigger
Source	Dual channel: CH1, CH2, Line, Ext ; 4 channel: CH1, CH2, CH3, CH4, Line, Ext
Trigger Mode	Auto (Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single
Trigger Type	Edge, Pulse Width, Video, Runt, Rise & Fall, Alternative, Event-Delay (1~65,535) events, Time-Delay(10nS~10S), I2C, SPI, UART
TriggerHold-off Range	10ns~10s
Coupling	AC, DC, LF rej, HF rej, Noise rej
Sensitivity	DC~50MHz approx. 1div or 1.0mV 50MHz~150MHz approx. 1.5div or 15mV 150MHz~350MHz approx. 2div or 20mV
EXT Trigger
Range	15V
Sensitivity	DC~150MHz pprox.100mV 150MHz~250MHz approx. 150mV 250MHz~350MHz approx. 150mV
Input Impedance	1MΩ3%, ~16pF
Horizontal
Range	1ns/div~100s/div (1-2-5steps); ROLL: 100ms/div~100s/div
Pre-Trigger	10div maximum
Post-Trigger	1,000div
Accuracy	20 ppm over any 1 ms time interval
Signal Acquisition System
Real Time Sample Rate	2.5GSa/s	5GSa/s	2.5GSa/s	5GSa/s	5GSa/s	5GSa/s	4GSa/s	4GSa/s
Equivalent Time Sample Rate	100GSa/s maximum for all models
Record Length	25k points
Acquisition Mode	Normal, Average, Peak Detect, High resolution, Single Normal: Acquire sampled values Average: From 2 to 256 waveforms included in average Peak Detect: Catches glitches as narrow as 2ns at all sweep speeds Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolution
X-Y Mode
X-axis input	Channel 1; Channel 3
Y-axis input	Channel 2; Channel 4
Phase Shift	3 at 100kHz
Cursors and Measurement
Cursors	Amplitude, Time, Gating available
Automatic Measurement	28 sets: Vpp, Vamp, Vavg, Vrms, Vhi, Vlo, Vmax, Vmin, Rise Preshoot/ Overshoot, Fall Preshoot/Overshoot, Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle, Phase, eight different delay measurements (FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF)
Cursors Measurement	V, T
Auto Counter	6digits, range from 2Hz minimum to the rated bandwidth
Power Measurements (optional)
Power Quality Measurements	VRMS, V Crest Factor, Frequency, IRMS, I Crest Factor, True Power, Apparent Power, Reactive Power, Power Factor, Phase Angle.
Harmonics	Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
Ripple Measurements	Vripple, Iripple
In-rush Current	First peak, second peak
Control Panel Functions
Autoset	Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset
Auto-Range	Allows users to quickly move from test point to test point without having to reset the oscilloscope for each test point
Save Setup	20 sets
Save Waveform	24 sets
Display System
TFT LCD	8″ TFT LCD SVGA color display (LED backlight)
Display Resolution	800 horizontal 600 vertical (SVGA)
Interpolation	Sin(x)/x and equivalent time sampling
Waveform Display	Dots, Vectors, Variable persistence, infinite persistence
Display Graticule	8 x 10 divisions
Display Brightness	Adjustable
Interface
RS-232C port	DB-9port
USB port	2 sets USB 2.0 high-speed host port; 1setUSB 2.0 high speed device port
Ethernet	RJ-45 port, 10/100Mbps
VGAVideoPort	DB-15port, SVGA monitor output
Line Output	3.5mm stereo output jack for Go/NoGo audio alarm
GPIB(Optional)	USB to GPIB converter
Go/NoGo BNC	Maximum 5V /10mA TTL open collector ouput
Kensington Style Lock	Rear panel security slot connects to standard Kensington style lock
Power Source
LineVoltageRange	AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection

Accessories

Accessory
User manual CD x 1 , Power cord x1
GTP-151R	150MHz(10:1) passive probe for GDS-3152/ 3154 (per channel)
GTP-251R	250MHz(10:1) passive probe for GDS-3252/ 3254 (per channel)
GTP-351R	350MHz(10:1) passive probe for GDS-3352/ 3354 (per channel)
GTP-501R	500MHz(10:1) passive probe for GDS-3502/ 3504 (per channel)

Optional Accessories
GUG-001	GPIB to USB adapter
GTP-033A	35MHz 1:1 passive probe
GTP-352R	350MHz(20:1) passive probe
GDP-025	25MHz high voltage differential probe
GDP-050	50MHz 25MHz high voltage differential probe
GDP-100	100MHz 25MHz high voltage differential probe
GCP-005	1kHz/5A Current probe
GCP-020	10kHz/200A Current probe
GCP-100	100KHz/100A Current probe
GCP-530	50MHz/ 30A Current probe
GCP-1030	100MHz/ 30A Current probe
GCP-206P	Power supply for current probe (2 input channels)
GCP-425P	Power supply for current probe (4 input channels)
GTL-248	GPIB Cable, Double Shielded, 2000mm
GTL-251	USB-GPIB Adapter, GPIB-USB-HS, USB 2.0, Hi-Speed USB compliance, 2000mm
GSC-008	Soft Carrying Case
GTL-110	Test lead, BNC to BNC connector
GTL-232	RS-232C cable, 9-pin female to 9-pin female, Null Modem for computer
GTL-246	USB 2.0 cable, A-B type cable 4P, 1800mm
GRA-411	Rack Adapter Panel
GDB-03	Oscilloscope Education and Training Kit
GKT-100	Deskew fixture