In Stock

Amprobe TMA40-A Datalogging Anemometer

Available for Quote

View List

Description

The Amprobe TMA40-A provides three measurements in one: Air Velocity or volume, Relative Humidity and Temperature. With three ways to view your measurement results. Choose between single point measurement, multiple points up to 99, or the added feature of data logging up to 2400 data points. User sets the measurement interval time from 1 to 200 seconds. The TMA40-A has a flexible cord to position vane where you need to measure. For accurate CFM results, the user simply inputs the area of the air source. TMA40-A ships with USB interface cable, Software CD, hard carrying case and user manual.

Quick Comparison

SettingsAmprobe TMA40-A Datalogging Anemometer removeAmprobe AMB-KIT1 Test Lead Set removeAmprobe PRM-6 Phase Sequence and Motor Rotation Tester removeAmprobe AT-6000-T Transmitter removeAmprobe AMB-25 Digital Insulation Resistance Tester removeAmprobe SC-3500 4? Signal Clamp for AT-3500 remove
Image
SKUN_Amprobe TMA40-AN_Amprobe AMB-KIT1N_Amprobe PRM-6N_Amprobe AT-6000-TN_Amprobe AMB-25N_Amprobe SC-3500
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
ContentThe Amprobe TMA40-A provides three measurements in one: Air Velocity or volume, Relative Humidity and Temperature. With three ways to view your measurement results. Choose between single point measurement, multiple points up to 99, or the added feature of data logging up to 2400 data points. User sets the measurement interval time from 1 to 200 seconds. The TMA40-A has a flexible cord to position vane where you need to measure. For accurate CFM results, the user simply inputs the area of the air source. TMA40-A ships with USB interface cable, Software CD, hard carrying case and user manual.TEST LEAD SET FOR INSULATION RESISTANCE TESTERSIf you install or connect 3-phase motors and systems, you recognize the importance of verifying the correct motor rotation and wiring phase sequence. Improper connections can cause motors to rotate in reverse direction, potentially damaging the motor and the equipment it is powering.The AT-6000-T Transmitter works on Energized and De-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments and features high signal, low signal, and loop modes. The Breaker Identification feature eliminates confusion of multiple false positives, common with older technology tracing tools, by identifying the one correct breaker or fuse with the highest recorded signal.This affordable and rugged megohmmeter is fast and easy to use, and offer the features you need for most insulation test applications including wires, cables, transformers and motors.The Amprobe SC-3500 4? Signal Clamp for AT-3500 attaches around a buried metallic pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. It does not require direct contact with metal to transmit the signal and can transmit signal through insulation on wires and into cable and wire bundles, providing more accurate tracing than locating with just a receiver and transmitter. Accommodates conductors up to 4? in diameter. Transmits a 33 kilohertz (kHz) frequency supplied by the T-3500 Transmitter (included in the AT-3500 kit).
Weight211132
Dimensions3.3 × 14.5 × 9 inN/A4 × 10 × 2 in9.5 × 6.5 × 1.75 in12.3 × 7.8 × 4.5 in9.84 × 9.84 × 9.84 in
Additional information
Weight 2 lbs
Dimensions 3.3 × 14.5 × 9 in
Weight 1 lbs
Weight 1 lbs
Dimensions 4 × 10 × 2 in
Weight 1 lbs
Dimensions 9.5 × 6.5 × 1.75 in
Weight 3 lbs
Dimensions 12.3 × 7.8 × 4.5 in
Weight 2 lbs
Dimensions 9.84 × 9.84 × 9.84 in