AC Line Splitter Model ALS-1
Available for Quote
The AC Line Splitter Model ALS-1 increases the sensitivity of clamp-on current probes and clamp-on meters. The Model ALS-1 provides temporary separation of conductors (avoiding splitting of the line) to facilitate measurement of current. Simply plug the Model ALS-1 into a connector for a safe measurement. Two clamp positions are available: X1 for direct readings, and X10 for actual reading multiplied by 10. Also features voltage checking.
Quick Comparison
| Settings | AC Line Splitter Model ALS-1 remove | Power Clamp-on Meter Model 407 (TRMS, 1000VAC/DC, 1000AAC/1500ADC, Ohms, Continuity, Energy, Harmonics, Power, THD, Recording ) remove | Clamp-on Leakage Current Meter Model 566 remove | AEMC 6527 4G Ohm, 250V/500V/1000V Digital Megohmmeter remove | Power Clamp-on Meter Model 605 (TRMS, 1000VAC/DC, 2000AAC/3000ADC, Ohms, Continuity, Phase Rotation, Power, THD) remove | AEMC 6418 Ground Resistance Tester remove | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image | |  |  |  |  |  | ||||||||||||||||||||||||
| SKU | N_AEMC ALS-1 | N_AEMC 407 | N_AEMC 566 | N_AEMC 6527 | N_AEMC 605 | N_AEMC 6418 | ||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||
| Price | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | ||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||
| Description | The AC Line Splitter Model ALS-1 increases the sensitivity of clamp-on current probes and clamp-on meters. The Model ALS-1 provides temporary separation of conductors (avoiding splitting of the line) to facilitate measurement of current. Simply plug the Model ALS-1 into a connector for a safe measurement. Two clamp positions are available: X1 for direct readings, and X10 for actual reading multiplied by 10. Also features voltage checking. | |||||||||||||||||||||||||||||
| Content | The Ground Resistance Tester Model 6418 measures ground rod, busbar, and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6418 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured. | |||||||||||||||||||||||||||||
| Weight | 2 | 9 | 9 | 2 | 9 | 3.5 | ||||||||||||||||||||||||
| Dimensions | 5 × 5 × 5 in | 6 × 6 × 12 in | 6 × 6 × 12 in | 10 × 5 × 5 in | 6 × 6 × 12 in | 12 × 5 × 5 in | ||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
