Instek GSP-9300B with Opt. 03 GPIB Interface for GSP-9300 (factory install only)
Available for Quote
GSP-9300B is a 3GHz spectrum analyzer to meet basic RF measurement requirements. It provides the frequency stability of 0.025ppm; the aging rate of 1ppm/year; a built-in preamplifier; the base noise of -149dBm/Hz, and more than 20 measurement applications, including AM/FM modulation signal analysis, signal channel analysis, and CATV parameter test. While collocating with TG option, GSP-9300B can conduct frequency response or power linearity tests for components.
Quick Comparison
| Settings | Instek GSP-9300B with Opt. 03 GPIB Interface for GSP-9300 (factory install only) remove | Instek GPS-4303 200W Quadruple-Output Linear DC Power Supply, 30V DC, 3 Amp remove | Instek PSU-03B Bus Bar for 4 units in parallel operation remove | Instek GPD-4303S 200W Quadruple-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp, 1mV, 1-milliamp Resolution remove | GW Instek GPR-3510HD Single Output Linear DC Power Supply with LED Display, 10 Output Amps, 35 Output Volts, 350 Output Watts remove | GW Instek GPR-1810HD Single Output Linear DC Power Supply with LED Display, Low Power Demands, 180W, 0-18V, 0-10A remove | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image | |  |  |  |  |  | ||||||||||||||||||||||||
| SKU | N_GW Instek GSP-9300B opt 03 | N_GW Instek GPS-4303 | N_GW Instek PSU-03B | N_GW Instek GPD-4303S | N_GW Instek GPR-3510HD | N_GW Instek GPR-1810HD | ||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||
| Price | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | ||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||
| Description | GSP-9300B is a 3GHz spectrum analyzer to meet basic RF measurement requirements. It provides the frequency stability of 0.025ppm; the aging rate of 1ppm/year; a built-in preamplifier; the base noise of -149dBm/Hz, and more than 20 measurement applications, including AM/FM modulation signal analysis, signal channel analysis, and CATV parameter test. While collocating with TG option, GSP-9300B can conduct frequency response or power linearity tests for components. | 195W, 4ch Output DC Programmable Power Supply 4 Outputs for GPD-4303S High Resolution Display 1mV / 1mA (GPD-X303S) CH1/CH2 Output: 30V / 3A CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S) CH4 Output: 5V / 1A (GPD-4303S) Auto Series / Parallel Tracking Mode Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight 4 Sets SAVE / RECALL panel setting User Friendly Operation, Coarse and Fine Voltage Control Warring Buzzer Output On / Off Switch USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan with Low Noise Safety Design: Reverse Polarity, Overload Protection | 350W DC Linear Power Supply 0-35V, 0-10A 0-35V, 0-10A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display | 180W DC Linear Power Supply 0-18V, 0-10A DIGITAL 0.01% High Resolution Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3½ Digit 0.5" LED Displays Showing Voltage and Current | ||||||||||||||||||||||||||
| Content | ||||||||||||||||||||||||||||||
| Weight | 10 | 15 | 2 | 18 | 15 | 15 | ||||||||||||||||||||||||
| Dimensions | 14 × 8 × 10 in | 18 × 12 × 10 in | 4 × 6 × 2 in | 22 × 15 × 12 in | 18 × 12 × 10 in | 18 × 12 × 10 in | ||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
