Instek GSP-9300B 9 kHz – 3 GHz Spectrum Analyzer with Built-in Preamp and Tracking Generator
Available for Quote
GSP-9300B is a 3GHz spectrum analyzer to meet basic RF measurement requirements. It provides the frequency stability of 0.025ppm; the aging rate of 1ppm/year; a built-in preamplifier; the base noise of -149dBm/Hz, and more than 20 measurement applications, including AM/FM modulation signal analysis, signal channel analysis, and CATV parameter test. While collocating with TG option, GSP-9300B can conduct frequency response or power linearity tests for components.
Quick Comparison
| Settings | Instek GSP-9300B 9 kHz - 3 GHz Spectrum Analyzer with Built-in Preamp and Tracking Generator remove | GW Instek GPE-1326 Multi-Output DC Power Supply, Single Channel, 192W, 0-32 VDC, 0-6A remove | Instek PSU-03B Bus Bar for 4 units in parallel operation remove | GW Instek GPR-1820HD Series GPR-H Single Output Linear DC Power Supply with LED Display, 0-18V 0-20A, 360W remove | Instek GPS-4303 200W Quadruple-Output Linear DC Power Supply, 30V DC, 3 Amp remove | GW Instek SFG-1003 DDS Function Generator with 6 Digit LED Display, 0.1Hz to 3MHz Frequency remove | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image | |  |  |  |  |  | ||||||||||||||||||||||||
| SKU | N_GW Instek GSP-9300BTG | N_GW Instek GPE-1326 | N_GW Instek PSU-03B | N_GW Instek GPR-1820HD | N_GW Instek GPS-4303 | N_GW Instek SFG-1003 | ||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||
| Price | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | ||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||
| Description | GSP-9300B is a 3GHz spectrum analyzer to meet basic RF measurement requirements. It provides the frequency stability of 0.025ppm; the aging rate of 1ppm/year; a built-in preamplifier; the base noise of -149dBm/Hz, and more than 20 measurement applications, including AM/FM modulation signal analysis, signal channel analysis, and CATV parameter test. While collocating with TG option, GSP-9300B can conduct frequency response or power linearity tests for components. | 192W Single Channel DC Power Supply GPE-1326 Single Channel, 192W Linear DC Power Supply 1 Independent Isolated Output 10mv min resolution 1ma min resolution 4.3 Inch LCD Display Setting & Read back Resolution 10mA / 1mA Output ON/OFF Analog Control (Remote I/O) for Output ON / OFF Set View function for checking an original V / I setting during output on Key Lock Function Tracking series and parallel operation Smart cooling fan achieving low noise Optional European Jack Type Terminal | 360W DC Linear Power Supply 0-18V, 0-20A 0-18V, 0-20A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display | SFG-1000 Series, an economic function generator with high accuracy and high stability output, is designed based on the DDS (Direct Digital Synthesis) technology embedded in a large scale FPGA. The frequency range of 3MHz and the output waveform selection as Sine, Square, Triangle and TTL of SFG-1000 Series adequately provide the fundamental features to ensure high confidence for the test results. The DDS technology at an affordable price gives a high-value solution to the users who need a signal source for accurate but unsophisticated measurement applications. | ||||||||||||||||||||||||||
| Content | ||||||||||||||||||||||||||||||
| Weight | 10 | 15 | 2 | 15 | 15 | 6 | ||||||||||||||||||||||||
| Dimensions | 14 × 8 × 10 in | 20 × 15 × 11 in | 4 × 6 × 2 in | 18 × 12 × 10 in | 18 × 12 × 10 in | 15 × 12 × 6 in | ||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
