Instek GLN-5040A Line Impedance Stabilization Networ – Line Impedance Stabilization Network [LISN] for GSP-9330 spectrum analyzer
Available for Quote
The GLN – 5040A Two Line V – Network is used for EMI testing. It provides stable impedance for the EUT terminals and the reference ground within the conducted emissions range. The GLN – 5040A also isolates the unwanted network signals from the power supply unit and only couples the disturbance voltage of the measured device to the receiver. The product’s performance is in compliance with the standard requirements of CISPR16 – 1 – 2 for V – networks with a simulated impedance of 50? H + 5 ?) || 50 ? in the frequency range of 9kHz to 30MHz. It uses standard BNC output connector with 50 ? output impedance to match any measurement devices such as receivers and spectrum analyzers.
Quick Comparison
Settings | Instek GLN-5040A Line Impedance Stabilization Networ - Line Impedance Stabilization Network [LISN] for GSP-9330 spectrum analyzer remove | GW Instek GPR-0830HD Series GPR-H Single Output Linear DC Power Supply with LED Display, 30 Output Amps, 8 Output Volts, 240 Output Watts remove | GW Instek GPR-1820HD Series GPR-H Single Output Linear DC Power Supply with LED Display, 0-18V 0-20A, 360W remove | Instek GPD-4303S 200W Quadruple-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp, 1mV, 1-milliamp Resolution remove | Instek PSU-03C Cable for 4 units in parallel operation remove | GW Instek GPE-1326 Multi-Output DC Power Supply, Single Channel, 192W, 0-32 VDC, 0-6A remove | ||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Image | ||||||||||||||||||||||||||||||
SKU | N_GW Instek GLN-5040A | N_GW Instek GPR-0830HD | N_GW Instek GPR-1820HD | N_GW Instek GPD-4303S | N_GW Instek PSU-03C | N_GW Instek GPE-1326 | ||||||||||||||||||||||||
Rating | ||||||||||||||||||||||||||||||
Price | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | ||||||||||||||||||||||||
Stock | ||||||||||||||||||||||||||||||
Availability | ||||||||||||||||||||||||||||||
Add to cart | ||||||||||||||||||||||||||||||
Description | The GLN - 5040A Two Line V - Network is used for EMI testing. It provides stable impedance for the EUT terminals and the reference ground within the conducted emissions range. The GLN - 5040A also isolates the unwanted network signals from the power supply unit and only couples the disturbance voltage of the measured device to the receiver. The product's performance is in compliance with the standard requirements of CISPR16 - 1 - 2 for V - networks with a simulated impedance of 50? H + 5 ?) || 50 ? in the frequency range of 9kHz to 30MHz. It uses standard BNC output connector with 50 ? output impedance to match any measurement devices such as receivers and spectrum analyzers. | 240W DC Linear Power Supply 0-8V, 0-30A 0-8V, 0-30A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display | 360W DC Linear Power Supply 0-18V, 0-20A 0-18V, 0-20A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display | 195W, 4ch Output DC Programmable Power Supply 4 Outputs for GPD-4303S High Resolution Display 1mV / 1mA (GPD-X303S) CH1/CH2 Output: 30V / 3A CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S) CH4 Output: 5V / 1A (GPD-4303S) Auto Series / Parallel Tracking Mode Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight 4 Sets SAVE / RECALL panel setting User Friendly Operation, Coarse and Fine Voltage Control Warring Buzzer Output On / Off Switch USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan with Low Noise Safety Design: Reverse Polarity, Overload Protection | 192W Single Channel DC Power Supply GPE-1326 Single Channel, 192W Linear DC Power Supply 1 Independent Isolated Output 10mv min resolution 1ma min resolution 4.3 Inch LCD Display Setting & Read back Resolution 10mA / 1mA Output ON/OFF Analog Control (Remote I/O) for Output ON / OFF Set View function for checking an original V / I setting during output on Key Lock Function Tracking series and parallel operation Smart cooling fan achieving low noise Optional European Jack Type Terminal | |||||||||||||||||||||||||
Content | ||||||||||||||||||||||||||||||
Weight | 12 | 15 | 15 | 18 | 2 | 15 | ||||||||||||||||||||||||
Dimensions | 23 × 18 × 11 in | 18 × 12 × 10 in | 18 × 12 × 10 in | 22 × 15 × 12 in | 4 × 6 × 2 in | 20 × 15 × 11 in | ||||||||||||||||||||||||
Additional information |
|
|
|
|
|
|