In Stock

Instek GLN-5040A Line Impedance Stabilization Networ – Line Impedance Stabilization Network [LISN] for GSP-9330 spectrum analyzer

Available for Quote

The GLN – 5040A Two Line V – Network is used for EMI testing. It provides stable impedance for the EUT terminals and the reference ground within the conducted emissions range. The GLN – 5040A also isolates the unwanted network signals from the power supply unit and only couples the disturbance voltage of the measured device to the receiver. The product’s performance is in compliance with the standard requirements of CISPR16 – 1 – 2 for V – networks with a simulated impedance of 50? H + 5 ?) || 50 ? in the frequency range of 9kHz to 30MHz. It uses standard BNC output connector with 50 ? output impedance to match any measurement devices such as receivers and spectrum analyzers.

View List
SKU: N_GW Instek GLN-5040A Category: Tag:

Quick Comparison

SettingsInstek GLN-5040A Line Impedance Stabilization Networ - Line Impedance Stabilization Network [LISN] for GSP-9330 spectrum analyzer removeGW Instek GPR-11H30D Single Output Linear DC Power Supply with LED Display, 0-110V 0-3A Power Supply removeGW Instek SFG-1003 DDS Function Generator with 6 Digit LED Display, 0.1Hz to 3MHz Frequency removeGW Instek GPD-2303S 180W Dual-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp removeInstek GPS-1850D 90W Single-Output Linear DC Power Supply with Digital LED screen, 18V DC, 5 Amp removeGW Instek GPR-1810HD Single Output Linear DC Power Supply with LED Display, Low Power Demands, 180W, 0-18V, 0-10A remove
Image
SKUN_GW Instek GLN-5040AN_GW Instek GPR-11H30DN_GW Instek SFG-1003N_GW Instek GPD-2303SN_GW Instek GPS-1850DN_GW Instek GPR-1810HD
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionThe GLN - 5040A Two Line V - Network is used for EMI testing. It provides stable impedance for the EUT terminals and the reference ground within the conducted emissions range. The GLN - 5040A also isolates the unwanted network signals from the power supply unit and only couples the disturbance voltage of the measured device to the receiver. The product's performance is in compliance with the standard requirements of CISPR16 - 1 - 2 for V - networks with a simulated impedance of 50? H + 5 ?) || 50 ? in the frequency range of 9kHz to 30MHz. It uses standard BNC output connector with 50 ? output impedance to match any measurement devices such as receivers and spectrum analyzers.330W DC Linear Power Supply 0-110V, 0-3A 0-110V, 0-3A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED DisplaySFG-1000 Series, an economic function generator with high accuracy and high stability output, is designed based on the DDS (Direct Digital Synthesis) technology embedded in a large scale FPGA. The frequency range of 3MHz and the output waveform selection as Sine, Square, Triangle and TTL of SFG-1000 Series adequately provide the fundamental features to ensure high confidence for the test results. The DDS technology at an affordable price gives a high-value solution to the users who need a signal source for accurate but unsophisticated measurement applications.180W, 2ch Output DC Programmable Power Supply 4 Outputs for GPD-4303S High Resolution Display 1mV / 1mA (GPD-X303S) CH1/CH2 Output: 30V / 3A CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S) CH4 Output: 5V / 1A (GPD-4303S) Auto Series / Parallel Tracking Mode Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight 4 Sets SAVE / RECALL panel setting User Friendly Operation, Coarse and Fine Voltage Control Warning Buzzer Output On / Off Switch USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan with Low Noise Safety Design: Reverse Polarity, Overload Protection90W DC Linear Power Supply 0-18V, 0-5A DIGITAL 0-5A DIGITAL Light and Compact Design 0.01% High Regulation Constant Voltage and Constant Current Operation Remote Control for External Programmability Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection Series or Parallel Operation180W DC Linear Power Supply 0-18V, 0-10A DIGITAL 0.01% High Resolution Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3½ Digit 0.5" LED Displays Showing Voltage and Current
Content
Weight12156151515
Dimensions23 × 18 × 11 in18 × 12 × 10 in15 × 12 × 6 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in
Additional information
Weight 12 lbs
Dimensions 23 × 18 × 11 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 6 lbs
Dimensions 15 × 12 × 6 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in