In Stock

GW Instek GAP-802 20dB Typical Preamplifier for GSP Series Spectrum Analyzer

Available for Quote

Preamplifier [GSP-830 only]. 20dB Preamplifier Typical. Frequency Range 9kHz ~ 3GHz

View List
SKU: N_GW Instek GAP-802 Category: Tag:

Quick Comparison

SettingsGW Instek GAP-802 20dB Typical Preamplifier for GSP Series Spectrum Analyzer removeInstek GPD-3303S 195W Triple-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp, 1mV, 1-milliamp Resolution removeGW Instek SFG-1003 DDS Function Generator with 6 Digit LED Display, 0.1Hz to 3MHz Frequency removeGW Instek GPR-30H10D Single Output Linear DC Power Supply with LED Display, 0-300V 0-1A removeGW Instek PLR 20-36 DC Power Supply, 20V, 36A, 720W Low Noise removeInstek GPS-4303 200W Quadruple-Output Linear DC Power Supply, 30V DC, 3 Amp remove
Image
SKUN_GW Instek GAP-802N_GW Instek GPD-3303SN_GW Instek SFG-1003N_GW Instek GPR-30H10DN_GW Instek PLR 20-36N_GW Instek GPS-4303
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionPreamplifier [GSP-830 only]. 20dB Preamplifier Typical. Frequency Range 9kHz ~ 3GHz0-30Vx2,0-3Ax2; 2.5V/3.3V/5V,3A, USB; 4 3/4 digit Three Independent Output : 30V/3A x 2, 2.5V/3.3V/5V/3A x 1 4 LED Display Sets : 3 Digits After Decimal Point Minimum Resolution : 1mV/1mA Digital Panel Control (Rotary Encoder Switch, Rubber Key With Indicator) Key-Lock User-Friendly Operation, Coarse/Fine Voltage Control 4 Panel Settings Save/Recall (Plus Factory Settings Recall) Output ON/OFF Tracking Series and Parallel Mode USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan Achieving Low Noise Warning Buzzer Light-Weight and Compact DesignSFG-1000 Series, an economic function generator with high accuracy and high stability output, is designed based on the DDS (Direct Digital Synthesis) technology embedded in a large scale FPGA. The frequency range of 3MHz and the output waveform selection as Sine, Square, Triangle and TTL of SFG-1000 Series adequately provide the fundamental features to ensure high confidence for the test results. The DDS technology at an affordable price gives a high-value solution to the users who need a signal source for accurate but unsophisticated measurement applications.300W DC Linear Power Supply 0-300V, 0-1A 0-300V, 0-1A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display

Hybrid Linear, Low noise, 0-20V/0-36A, 720W

  • Output Voltage Rating: 20V
  • Output Power: 720W
  • Low Ripple and Noise (0.5mVrms/ 10mArms)
  • Fast transition recovery time (100us)
  • Maximum 2 units in series connections or 3 units in parallel connections
  • Select the setting digits for voltage and current (coarse/ fine volume control)
  • Panel Lock Function
  • 3 set of preset function
  • Output off timer function (Range: 1min to 1000hours & 59mins)
  • CC priority function (prevent overshoot & inrush current)
  • Sequence function of PC editing (Max.: 1000 steps/ Min. step period: 50ms)
  • Protection: OVP, UVP, OCP, remote sensing (Terminal open)
  • External Analog Control Function
  • PC Remote Interface (Standard): RS-232; (Optional): GPIB / USB / LAN
  • CE Compliance
Content
Weight2186151515
Dimensions6 × 8 × 4 in18 × 12 × 10 in15 × 12 × 6 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in
Additional information
Weight 2 lbs
Dimensions 6 × 8 × 4 in
Weight 18 lbs
Dimensions 18 × 12 × 10 in
Weight 6 lbs
Dimensions 15 × 12 × 6 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in