Description
PST-3202 158W, 3-Channel, Programmable Linear D.C. Power Supply
- An overall digitalization of programmable interface with high resolution.
- The 192×128 LCD Display can appear multiple settings and measurement results simultaneously.(The display mode is changeable).
- Intuitional, intelligent interface window display is convenient for user to operate the instrument.
- High stability and low draft.
- The function of over voltage/current/temperature protection.
- Intelligent control fan (Vary with different output power.)
PST-Series Programmable Power Supply is controlled by Micro Processor Unit (MPU) that can easily connect communication interface RS-232 or GPIB to computer in order to satisfy users’ demand for auto-testing and auto-control.
The voltage and current are completely controlled by 12 bits D/A Converter with higher resolution and accuracy. Also, the digitalization of system makes a speedy, precise and convenient input of information controlled by keyboard.
The adjustment of voltage/current is made by software calibration without manual error that will increase the preciseness of the instrument. The function of Over Voltage Protection (OVP) and Over Current Protection (OCP) is set with software and detected with hardware to achieve protected function precisely and speedily in order to secure users from danger by using the instrument.
Other Features:
- Warning signal by the built-in Buzzer.
- Step by step calibration procedure.
- Brand new panel design and the 1/2 rack size reduction volume design.
- Wheel knob of Fine and Coarse.
- 100 groups storage space setting.
- Parallel and series operation modes.
- IEEE-488.2 and SCPI compatible command setting.
- 0.1 sec timer for output working loop (Auto step running)
- Correspond to CE safety regulation.
3-channel, programmable linear DC power supply
The PST series are 3-channel, 96, or 158W, programmable linear DC power supplies. High resolution, maintained at 10mV, 1mA ( 3A). OVP, OCP, and OTP protect the PST-Series and its loads from unexpected conditions. The PST Series are capable of independent, series, or parallel operation for increased flexibility. The large LCD display conveniently displays all outputs and configurations simultaneously to simplify operation.
The programmable interface allows automatic stepping, 100 sets of memory, and comprehensive timing operations. GPIB and RS232C interfaces, Labview driver,s and SCPI compatibility allow easy ATE software development and remote control. The versatile PST-Series is ideal for high resolution, multiple outputs, and automated operations such as production testing and rack mounting systems.
Manufacturer Specs
| Model | PST-3202 | PST-3201 |
| OUTPUT | ||
| Voltage | 0~32Vx2, 0~6Vx1 | 0~32Vx3 |
| Current | 0~2Ax2, 0~5Ax1 | 0~1Ax3 |
| OVP | 0~33Vx2, 0~7Vx1 | 0~33Vx3 |
| LOAD REGULATION | ||
| Voltage | < 3mV ( < 5mV rating current > 3.0A) | |
| Current | < 3mA ( < 5mV rating current > 3.0A) | |
| LINE REGULATION | ||
| Voltage | < 3mV | |
| Current | < 3mA | |
| RESOLUTION | ||
| Voltage | 10mV | |
| Current | 1mA ( 2mA, rating current >3.0A ) | |
| OVP | 10mV | |
| PROGRAM ACCURACY (25±5° C) | ||
| Voltage | < 0.05% + 20mV | |
| Current | < 0.1% + 5mA ( + 10mA, rating current> 3.0A) | |
| OVP | < 0.05% + 20mV | |
| RIPPLE & NOISE (20Hz ~ 20MHz) | ||
| Voltage | Ripple≤ 1mVrms / 3mVp-p Noise≤ 2mVrms / 30mVp-p |
|
| Current | < 3mArms ( < 5mArms, rating current > 3.0A ) | |
| TEMPERATURE COEFFICIENT (0~40° C ) | ||
| Voltage | < 100ppm + 3mV | |
| Current | < 100ppm + 3mA | |
| READBACK RESOLUTION | ||
| Voltage | 10mV (20mV, rating voltage >36V) | |
| Current | 1mA ( 2mA, rating current > 3.0A ) | |
| READBACK ACCURACY (25±5° C) | ||
| Voltage | < 0.05% + 10mV (+20mV, rating voltage >36V) | |
| Current | < 0.1% + 5mA (+10mA, rating current >3.0A) | |
| READBACK TEMPERATURE COEFFICIENT | ||
| Voltage | < 100ppm + 10mV (+20mV, rating voltage >36V) | |
| Current | < 150ppm + 5mA ( + 10mA rating current > 3.0A ) | |
| RESPONSE TIME | ||
| Voltage Up 10%~90% | < 100mS | |
| VVoltage Down 90%~10% | < 100mS ( >10% rating load ) | |
| DRIFT | ||
| Voltage | < 100ppm + 10mV (+20mV, rating voltage >36V) | |
| Current | < 150ppm + 10mA | |
| TRACK OPERATION | ||
| Tracking Error | ≤ 0.1% + 20mV | |
| Series (Load Effect) | < 20mV | |
| PARALLEL OPERATION | ||
| Program Accuracy (25±5° C) | Voltage < 0.05% + 20mV Current < 0.1% + 10mA OVP < 0.05% + 20mV |
|
| Load Effect | Voltage < 3mV ( < 5mV rating current > 3.0A) Current < 6mA |
|
| Source Effect | Voltage < 3mV Current < 6mA |
|
| MEMORY | ||
| Store / Recall sets 100 set | ||
| TIMER | ||
| Setting time | 0.1 sec ~ 99 min 59 sec ( Max 99 min 59 sec x 100) | |
| Resolution | 0.1 sec | |
| Function | Auto Step Running (for output working loop) | |
| INTERFACE | ||
| Standard : RS-232C Option : GPIB (IEEE488.2) |
||
| POWER SOURCE | ||
| AC100V/120V/220V±10%, 230V (+10%/-6%), 50/60Hz | ||
| ACCESSORIES | ||
| User manual x 1 Power cord x 1 Test lead GTL-104 x 3 [or European Test Lead GTL-204 x 3] |
||
| DIMENSIONS & WEIGHT | ||
| 230(W) x 140(H) x 380(D)mm Approx. 10 kg |
||
Tech Specs
Power Supplies/DC Power Supplies Template |
|
|---|---|
| Outputs | Triple |
| Voltage Output 1 | Variable |
| Max Voltage Output 1 | 32 V |
| Min Voltage Output 1 | 0 V |
| Programmable | Yes |
| Current Output 1 | Variable |
| Max Current Output 1 | 2 A |
| Min Current Output 1 | 0 A |
| Meter Type | Digital |
| Switching | No |
| Linear/Switching | Linear |
| Max Display Resolution Current | 1 mA |
| Max Display Resolution Voltage | 10 mV |
| Constant current/voltage | No |
| Remote Sensing | No |
Test Equipment General Attributes |
|
| Safety Approval | CSA |
| Interfaces I/O | RS-232 |
| Product Weight | 10 KILOS (22.05 LBS) |
| Product Height | 140 MM (5.51 IN) |
| Product Length | 380 MM (14.96 IN) |
| Product Width | 230 MM (9.06 IN) |
| Data Logging | No |
| Calibration Included | Factory Calibration |
| Power Supply Voltage | 120V 50/60 Hz |
| Country of Origin | China |
| Shipping Height | 9.65 IN |
| Shipping Length | 19.10 IN |
| Shipping Width | 13.00 IN |
