In Stock

GW Instek PSM-3004 Dual Range DC Power Supply, 15 V/7 A, 30 V/4 A

Available for Quote

Programmable DC Linear Dual Range 0-15V/7A; 0-30V/4A

0~+15V/7A; 0~+30V/4A
Single Output Dual Range Max. 200W
High Resolution: 1mV/1mA
Stable & Clear Power: 0.01% Load/Line Regulation, 350uVrms Ripple
Auto Step running with timer setting and 100 sets Memory
Safety Design: OVP, OCP & OTP ; Output ON/OFF Control
Self-Test and Software Calibration
High Visible Vacuum-Fluorescent Display
Front and Rear Output Terminal
LabView Driver
Interface (Standard): RS-232, GPIB (IEEE 488.2)

View List
SKU: N_GW Instek PSM-3004 Category: Tag:

Quick Comparison

SettingsGW Instek PSM-3004 Dual Range DC Power Supply, 15 V/7 A, 30 V/4 A removeGW Instek GPE-1326 Multi-Output DC Power Supply, Single Channel, 192W, 0-32 VDC, 0-6A removeInstek GPS-4303 200W Quadruple-Output Linear DC Power Supply, 30V DC, 3 Amp removeGW Instek GPR-7550D Single Output Linear DC Power Supply with LED Display, 5 Output Amps, 75 Output Volts, 375 Output Watts removeInstek GPD-3303S 195W Triple-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp, 1mV, 1-milliamp Resolution removeGW Instek GPR-6060D Single Output Linear DC Power Supply with LED Display, 6 Output Amps, 60 Output Volts, 360 Output Watts remove
Image
SKUN_GW Instek PSM-3004N_GW Instek GPE-1326N_GW Instek GPS-4303N_GW Instek GPR-7550DN_GW Instek GPD-3303SN_GW Instek GPR-6060D
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionProgrammable DC Linear Dual Range 0-15V/7A; 0-30V/4A 0~+15V/7A; 0~+30V/4A Single Output Dual Range Max. 200W High Resolution: 1mV/1mA Stable & Clear Power: 0.01% Load/Line Regulation, 350uVrms Ripple Auto Step running with timer setting and 100 sets Memory Safety Design: OVP, OCP & OTP ; Output ON/OFF Control Self-Test and Software Calibration High Visible Vacuum-Fluorescent Display Front and Rear Output Terminal LabView Driver Interface (Standard): RS-232, GPIB (IEEE 488.2)192W Single Channel DC Power Supply GPE-1326 Single Channel, 192W Linear DC Power Supply 1 Independent Isolated Output 10mv min resolution 1ma min resolution 4.3 Inch LCD Display Setting & Read back Resolution 10mA / 1mA Output ON/OFF Analog Control (Remote I/O) for Output ON / OFF Set View function for checking an original V / I setting during output on Key Lock Function Tracking series and parallel operation Smart cooling fan achieving low noise Optional European Jack Type Terminal375W DC Linear Power Supply 0-75V, 0-5A 0-75V, 0-5A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display0-30Vx2,0-3Ax2; 2.5V/3.3V/5V,3A, USB; 4 3/4 digit Three Independent Output : 30V/3A x 2, 2.5V/3.3V/5V/3A x 1 4 LED Display Sets : 3 Digits After Decimal Point Minimum Resolution : 1mV/1mA Digital Panel Control (Rotary Encoder Switch, Rubber Key With Indicator) Key-Lock User-Friendly Operation, Coarse/Fine Voltage Control 4 Panel Settings Save/Recall (Plus Factory Settings Recall) Output ON/OFF Tracking Series and Parallel Mode USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan Achieving Low Noise Warning Buzzer Light-Weight and Compact Design
Content
Weight151515151815
Dimensions18 × 12 × 10 in20 × 15 × 11 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in
Additional information
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 20 × 15 × 11 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 18 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in