In Stock

Power & Energy Logger Model PEL 102 (No LCD, w/3 MA193-10-BK Sensors) {ETL}

Available for Quote

View List
SKU: N_AEMC PEL 102 Category: Tag:

Quick Comparison

SettingsPower & Energy Logger Model PEL 102 (No LCD, w/3 MA193-10-BK Sensors) {ETL} removePower Clamp-on Meter Model 605 (TRMS, 1000VAC/DC, 2000AAC/3000ADC, Ohms, Continuity, Phase Rotation, Power, THD) removeAEMC 6418 Ground Resistance Tester removeClamp-on Meter Model CM605 (100AAC/DC, Low Current) removeAEMC 6527 4G Ohm, 250V/500V/1000V Digital Megohmmeter removeCalibration of AEMC 6250 Micro-Ohmmeter NIST Calibration with Certificate remove
Image
SKUN_AEMC PEL 102N_AEMC 605N_AEMC 6418N_AEMC CM605N_AEMC 6527C_AEMC 6250
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Instant Quote

DescriptionThe Model CM605 is a versatile device that is capable of measuring both AC/DC voltage (up to 600V) and AC/DC current up to 100 Amps. It can also measure resistance up to 10k? and includes a continuity buzzer to assist in circuit verification. The Multifunction Clamp-on Meter Model CM605 is a good choice for both process and general industrial applications. It can detect milliamp process signals, as well as the higher currents up to 100A associated with general industrial monitoring and troubleshooting. For operator convenience, the Model CM605 can also hold the last reading in the display and capture the peak value at the time of the measurement.All equipment calibrations do not include any equipment warranty. Equipment that has any visible sign of damage will be documented and the customer will be notified before any services are performed. Any needed repairs will be quoted separately. All of our items will ship with Warranty Void tamper resistant seals. If these seals have been removed or tampered with, the Calibration will be void.
ContentThe Ground Resistance Tester Model 6418 measures ground rod, busbar, and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6418 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured.
Weight1293.5928
Dimensions8 × 6 × 6 in6 × 6 × 12 in12 × 5 × 5 in6 × 6 × 12 in10 × 5 × 5 in10 × 8 × 12 in
Additional information
Weight 12 lbs
Dimensions 8 × 6 × 6 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 3.5 lbs
Dimensions 12 × 5 × 5 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 2 lbs
Dimensions 10 × 5 × 5 in
Weight 8 lbs
Dimensions 10 × 8 × 12 in