| Description | GW Instek launches a new series of desktop battery tester, the GBM-3000 series, which uses AC 1kHz as the test signal and measures battery's voltage and internal resistance to 300V (GBM-3300) and 80V (GBM-3080). The series features 3.5" TFT LCD, 4-wire measurement method, high-resolution (6-digit voltage / 5-digit resistance) measurement display capability, and independent GO/NOGO determination of voltage and resistance, various communications interfaces, etc. to meet various types of battery measurements, ranging from single cell, battery cell, to the end product (battery), etc. so as to facilitate users in achieving accurate measurements at all stages of production. | 0-30Vx2,0-3Ax2; 2.5V/3.3V/5V,3A, USB; 4 3/4 digit
Three Independent Output : 30V/3A x 2, 2.5V/3.3V/5V/3A x 1
4 LED Display Sets : 3 Digits After Decimal Point
Minimum Resolution : 1mV/1mA
Digital Panel Control (Rotary Encoder Switch, Rubber Key With Indicator)
Key-Lock
User-Friendly Operation, Coarse/Fine Voltage Control
4 Panel Settings Save/Recall (Plus Factory Settings Recall)
Output ON/OFF
Tracking Series and Parallel Mode
USB Device for Remote Control (Baud Rate 115200 bps Maximum)
Free downloadable PC software
Smart Cooling Fan Achieving Low Noise
Warning Buzzer
Light-Weight and Compact Design | Hybrid Linear, Low noise, 0-36V/0-10A, 360W
- Output Voltage Rating： 36V
- Output Power： 360W
- Low Ripple and Noise (0.5mVrms/ 10mArms)
- Fast transition recovery time (100us)
- Maximum 2 units in series connections or 3 units in parallel connections
- Select the setting digits for voltage and current (coarse/ fine volume control)
- Panel Lock Function
- 3 set of preset function
- Output off timer function (Range: 1min to 1000hours & 59mins)
- CC priority function (prevent overshoot & inrush current)
- Sequence function of PC editing (Max.: 1000 steps/ Min. step period: 50ms)
- Protection: OVP, UVP, OCP, remote sensing (Terminal open)
- External Analog Control Function
- PC Remote Interface (Standard)： RS-232; (Optional)： GPIB / USB / LAN
- CE Compliance
| 192W Two Channel DC Power Supply
GPE-2323 2 Channels, 192W Linear DC Power Supply
2 Independent Isolated Output
10mv min resolution 1ma min resolution
4.3 Inch LCD Display
Setting & Read back Resolution 10mA / 1mA
Output ON/OFF
Analog Control (Remote I/O) for Output ON / OFF
Set View function for checking an original V / I setting during output on
Key Lock Function
Tracking series and parallel operation
Smart cooling fan achieving low noise
Optional European Jack Type Terminal | 90W DC Linear Power Supply 0-18V, 0-5A DIGITAL
0-5A DIGITAL
Light and Compact Design
0.01% High Regulation
Constant Voltage and Constant Current Operation
Remote Control for External Programmability
Internal Select for Continuous or Dynamic Load
Low Ripple and Noise
Overload and Reverse Polarity Protection
Series or Parallel Operation | 195W, 4ch Output DC Programmable Power Supply
4 Outputs for GPD-4303S
High Resolution Display 1mV / 1mA (GPD-X303S)
CH1/CH2 Output: 30V / 3A
CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S)
CH4 Output: 5V / 1A (GPD-4303S)
Auto Series / Parallel Tracking Mode
Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight
4 Sets SAVE / RECALL panel setting
User Friendly Operation, Coarse and Fine Voltage Control
Warring Buzzer
Output On / Off Switch
USB Device for Remote Control (Baud Rate 115200 bps Maximum)
Free downloadable PC software
Smart Cooling Fan with Low Noise
Safety Design: Reverse Polarity, Overload Protection |
| Additional information |
| Weight |
8 lbs |
| Dimensions |
12 × 12 × 6 in |
|
| Weight |
18 lbs |
| Dimensions |
18 × 12 × 10 in |
|
| Weight |
15 lbs |
| Dimensions |
18 × 12 × 10 in |
|
| Weight |
15 lbs |
| Dimensions |
18 × 12 × 10 in |
|
| Weight |
15 lbs |
| Dimensions |
18 × 12 × 10 in |
|
| Weight |
18 lbs |
| Dimensions |
22 × 15 × 12 in |
|
