In Stock

GWInstek GPT-15004 AC 500VA AC/DC/IR/GB Electrical Safety Analyzer

Available for Quote

Safety Analyzer, AC/DC/IR/GB/GC 200VA

  • Instek’s flagship safety analyzer series
  • AC (0.05 – 5kV)
  • DC (0.05 – 6kV)
  • IR (50 – 1200V DC / 0.1M – 50G Ω)
  • GB (3 – 32A AC / 1 – 650m Ω)
  • Complies with IEC 61010-2-034
  • 7”TFT LCD
  • Manual / Auto Mode
  • RMS Current Measurement
  • Zero Crossing Turn-on Operation
  • Controllable Ramp-up & Ramp-down Time
  • Capacitive Load Testing Capability up to 47μF

More Details

Quick Comparison

SettingsGWInstek GPT-15004 AC 500VA AC/DC/IR/GB Electrical Safety Analyzer removeAmprobe TMA-21HW Hotwire Anemometer with Temperature removeAmprobe AT-2004-A Advanced Wire Tracer removeAmprobe AT-6000-R Wire Tracer Receiver with Back Light LCD Display removeAmprobe AMB-KIT1 Test Lead Set removeAmprobe LM-120 Light Meter remove
Image
SKUN_GW Instek GPT-15004N_Amprobe TMA-21HWN_Amprobe AT-2004-AN_Amprobe AT-6000-RN_Amprobe AMB-KIT1N_Amprobe LM-120
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description

Safety Analyzer, AC/DC/IR/GB/GC 200VA

  • Instek’s flagship safety analyzer series
  • AC (0.05 - 5kV)
  • DC (0.05 - 6kV)
  • IR (50 - 1200V DC / 0.1M - 50G Ω)
  • GB (3 - 32A AC / 1 - 650m Ω)
  • Complies with IEC 61010-2-034
  • 7”TFT LCD
  • Manual / Auto Mode
  • RMS Current Measurement
  • Zero Crossing Turn-on Operation
  • Controllable Ramp-up & Ramp-down Time
  • Capacitive Load Testing Capability up to 47μF
More Details
ContentThe Amprobe TMA-21HW Hotwire anemometer technology eliminates the use of bearings and rotating parts. When compared to standard bearing type probes, the compact Amprobe hotwire sensor is more reliable (no mechanical moving parts) and allows for easier access to duct and confined spaces. The Amprobe TMA-21HW Hotwire anemometer measures air flow volume and velocity, it features a telescopic probe for positioning the sensor, and is used by HVAC/R technicians to measure wind flow and temperature in air conditioning systems.With the Amprobe AT-2004-A Wire Tracer you can trace live, de-energized, or open (broken) wires buried behind walls up to 13 feet (4 m) thick, without interrupting power. It?s a great choice for finding wires in walls, locating breakers, neutrals, and ground lines, and zeroing in on shorts, ground faults, and broken wires. This electrical wire tracer doesn?t interfere with sensitive electronic equipment so it?s safe to use in data centers.Amprobe?s advanced wire tracer technology combines a Receiver and powerful Transmitter to locate energized and de-energized wires, breakers, and fuses without having to disconnect any equipment. The Receiver features four tracing modes optimized for a range of applications, and the Transmitter utilizes two optimized frequencies that allows for a clean and reliable signal. Whether you?re a novice user or an expert, the AT-6000 Advanced Wire Tracer Series kits will help you get the job done fast.TEST LEAD SET FOR INSULATION RESISTANCE TESTERSThe Amprobe LM-120 light meter measures the visible light from fluorescent, metal halide, high-pressure sodium or incandescent sources. It is a portable, easy-to-use digital light meter designed for simple one-hand operation reading in Lumen (lux) or foot candle (fc) units. The LM-120 measures a wide range of light up to 20,000 fc or 200,000 lux with an accurate, high resolution of 0.01 fc/lux. This unit is Auto-ranging plus manual ranging with ability to Zero out the reading before taking a measurement.
Weight4625111
Dimensions8 × 22 × 16 in14 × 11.4 × 3.7 in17 × 14.6 × 6.8 in9.5 × 6.5 × 1.75 inN/A4 × 10 × 2 in
Additional information
Weight 46 lbs
Dimensions 8 × 22 × 16 in
Weight 2 lbs
Dimensions 14 × 11.4 × 3.7 in
Weight 5 lbs
Dimensions 17 × 14.6 × 6.8 in
Weight 1 lbs
Dimensions 9.5 × 6.5 × 1.75 in
Weight 1 lbs
Weight 1 lbs
Dimensions 4 × 10 × 2 in