In Stock

GWInstek GPT-15003 AC 500VA AC/DC/IR Electrical Safety Analyzer

Available for Quote

Safety Analyzer, AC/DC/IR/GC 200VA

  • Instek’s flagship safety analyzer series
  • AC (0.05 – 5kV)
  • DC (0.05 – 6kV)
  • IR (50 – 1200V DC / 0.1M – 50G Ω)
  • Complies with IEC 61010-2-034
  • 7”TFT LCD
  • Manual / Auto Mode
  • RMS Current Measurement
  • Zero Crossing Turn-on Operation
  • Controllable Ramp-up & Ramp-down Time
  • Capacitive Load Testing Capability up to 47μF

More Detail

Quick Comparison

SettingsGWInstek GPT-15003 AC 500VA AC/DC/IR Electrical Safety Analyzer removeAmprobe TACH-20 Tachometer with Contact and Non-Contact Measurement removeAmprobe AT-6000-T Transmitter removeAmprobe R2000 Receiver For Wire Tracers removeAmprobe AT-2004-A Advanced Wire Tracer removeAmprobe TMA-21HW Hotwire Anemometer with Temperature remove
Image
SKUN_GW Instek GPT-15003N_Amprobe TACH-20N_Amprobe AT-6000-TN_Amprobe R2000N_Amprobe AT-2004-AN_Amprobe TMA-21HW
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description

Safety Analyzer, AC/DC/IR/GC 200VA

  • Instek’s flagship safety analyzer series
  • AC (0.05 - 5kV)
  • DC (0.05 - 6kV)
  • IR (50 - 1200V DC / 0.1M - 50G Ω)
  • Complies with IEC 61010-2-034
  • 7”TFT LCD
  • Manual / Auto Mode
  • RMS Current Measurement
  • Zero Crossing Turn-on Operation
  • Controllable Ramp-up & Ramp-down Time
  • Capacitive Load Testing Capability up to 47μF
More Detail
ContentThe Amprobe TACH20 Hand-held Tachometer accurately measures rotational or surface speed as well as length. It comes with a large LCD display that allows the user to easily read the measurement. It also has a built in memory function that permits automatic storage of maximum, minimum, average values plus the last measurement displayed.The AT-6000-T Transmitter works on Energized and De-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments and features high signal, low signal, and loop modes. The Breaker Identification feature eliminates confusion of multiple false positives, common with older technology tracing tools, by identifying the one correct breaker or fuse with the highest recorded signal.Use for Wire Tracer series AT-2000With the Amprobe AT-2004-A Wire Tracer you can trace live, de-energized, or open (broken) wires buried behind walls up to 13 feet (4 m) thick, without interrupting power. It?s a great choice for finding wires in walls, locating breakers, neutrals, and ground lines, and zeroing in on shorts, ground faults, and broken wires. This electrical wire tracer doesn?t interfere with sensitive electronic equipment so it?s safe to use in data centers.The Amprobe TMA-21HW Hotwire anemometer technology eliminates the use of bearings and rotating parts. When compared to standard bearing type probes, the compact Amprobe hotwire sensor is more reliable (no mechanical moving parts) and allows for easier access to duct and confined spaces. The Amprobe TMA-21HW Hotwire anemometer measures air flow volume and velocity, it features a telescopic probe for positioning the sensor, and is used by HVAC/R technicians to measure wind flow and temperature in air conditioning systems.
Weight4611152
Dimensions8 × 22 × 16 in2 × 8.8 × 7.6 in9.5 × 6.5 × 1.75 in11.9 × 10 × 5.8 in17 × 14.6 × 6.8 in14 × 11.4 × 3.7 in
Additional information
Weight 46 lbs
Dimensions 8 × 22 × 16 in
Weight 1 lbs
Dimensions 2 × 8.8 × 7.6 in
Weight 1 lbs
Dimensions 9.5 × 6.5 × 1.75 in
Weight 1 lbs
Dimensions 11.9 × 10 × 5.8 in
Weight 5 lbs
Dimensions 17 × 14.6 × 6.8 in
Weight 2 lbs
Dimensions 14 × 11.4 × 3.7 in