In Stock

GWInstek GPT-15002 AC 500VA AC/DC Withstanding Voltage Electrical Safety Analyzer

Available for Quote

Safety Analyzer, AC/DC/GC 200VA

  • Instek’s flagship safety analyzer series
  • AC (0.05 – 5kV)
  • DC (0.05 – 6kV)
  • Complies with IEC 61010-2-034
  • 7”TFT LCD
  • Manual / Auto Mode
  • RMS Current Measurement
  • Zero Crossing Turn-on Operation
  • Controllable Ramp-up & Ramp-down Time
  • Capacitive Load Testing Capability up to 47μF

More Details

Quick Comparison

SettingsGWInstek GPT-15002 AC 500VA AC/DC Withstanding Voltage Electrical Safety Analyzer removeAmprobe AT-2004-A Advanced Wire Tracer removeAmprobe TMA-21HW Hotwire Anemometer with Temperature removeAmprobe AMB-55 Industrial High-Voltage Insulation Tester removeAmprobe AT-2005-A Advanced Wire Tracer removeAEMC 6527 4G Ohm, 250V/500V/1000V Digital Megohmmeter remove
Image
SKUN_GW Instek GPT-15002N_Amprobe AT-2004-AN_Amprobe TMA-21HWN_Amprobe AMB-55N_Amprobe AT-2005-AN_AEMC 6527
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description

Safety Analyzer, AC/DC/GC 200VA

  • Instek’s flagship safety analyzer series
  • AC (0.05 - 5kV)
  • DC (0.05 - 6kV)
  • Complies with IEC 61010-2-034
  • 7”TFT LCD
  • Manual / Auto Mode
  • RMS Current Measurement
  • Zero Crossing Turn-on Operation
  • Controllable Ramp-up & Ramp-down Time
  • Capacitive Load Testing Capability up to 47μF
More Details
ContentWith the Amprobe AT-2004-A Wire Tracer you can trace live, de-energized, or open (broken) wires buried behind walls up to 13 feet (4 m) thick, without interrupting power. It?s a great choice for finding wires in walls, locating breakers, neutrals, and ground lines, and zeroing in on shorts, ground faults, and broken wires. This electrical wire tracer doesn?t interfere with sensitive electronic equipment so it?s safe to use in data centers.The Amprobe TMA-21HW Hotwire anemometer technology eliminates the use of bearings and rotating parts. When compared to standard bearing type probes, the compact Amprobe hotwire sensor is more reliable (no mechanical moving parts) and allows for easier access to duct and confined spaces. The Amprobe TMA-21HW Hotwire anemometer measures air flow volume and velocity, it features a telescopic probe for positioning the sensor, and is used by HVAC/R technicians to measure wind flow and temperature in air conditioning systems.Eliminate downtime, predict the lifetime of equipment and reduce safety hazards with the Amprobe AMB-55 Insulation Resistance Tester that tests voltage and step voltage to 5,500 V. You can accurately test cables, transformers, motors, surge arrestors and generators in noisy environments such as high voltage switchyards. It also boasts built-in noise rejection filters and shielded test leads to provide high EMI immunityLike the AT-2004, the Amprobe AT-2005 Wire Tracer traces live wires buried or hidden behind walls up to 13 feet (4 m) thick without interrupting power. However, the AT-2005 electrical wire tracer also includes a battery booster that strengthens the signal for more accurately tracing opens and finding wires in walls. The AT-2005 is used for quickly locating breakers, broken wires, neutrals, grounds, shorts and pinpointing ground faults.
Weight46521582
Dimensions8 × 22 × 16 in17 × 14.6 × 6.8 in14 × 11.4 × 3.7 in17.3 × 5.8 × 13 in19.9 × 17.2 × 12.5 in10 × 5 × 5 in
Additional information
Weight 46 lbs
Dimensions 8 × 22 × 16 in
Weight 5 lbs
Dimensions 17 × 14.6 × 6.8 in
Weight 2 lbs
Dimensions 14 × 11.4 × 3.7 in
Weight 15 lbs
Dimensions 17.3 × 5.8 × 13 in
Weight 8 lbs
Dimensions 19.9 × 17.2 × 12.5 in
Weight 2 lbs
Dimensions 10 × 5 × 5 in