In Stock

Amprobe UAT-620 Underground Utility Locator Kit with Clamp

Available for Quote

View List
Add to wishlist
SKU: N_Amprobe UAT-620 Category: Tag:

Description

Accidentally hitting a utility line during a project can lead to costly repairs and create hazardous public safety situations. Digging in the wrong place can also lead to unnecessary delays and costs for your project, and ultimately, your company. Avoid this disruption with the rugged and durable Amprobe UAT-600 Series, designed to accurately pinpoint underground utilities and buried services up to 100 feet deep with accurate depth measurement to 20 feet.

Quick Comparison

SettingsAmprobe UAT-620 Underground Utility Locator Kit with Clamp removeAmprobe MLS55-3 Pipe Transmitter for AT-3500 removeAmprobe TMA-21HW Hotwire Anemometer with Temperature removeAmprobe SC-3500 4? Signal Clamp for AT-3500 removeAmprobe AMB-KIT1 Test Lead Set removeAmprobe AMB-110 Industrial High-Voltage Insulation Tester remove
Image
SKUN_Amprobe UAT-620N_Amprobe MLS55-3N_Amprobe TMA-21HWN_Amprobe SC-3500N_Amprobe AMB-KIT1N_Amprobe AMB-110_EB
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
ContentAccidentally hitting a utility line during a project can lead to costly repairs and create hazardous public safety situations. Digging in the wrong place can also lead to unnecessary delays and costs for your project, and ultimately, your company. Avoid this disruption with the rugged and durable Amprobe UAT-600 Series, designed to accurately pinpoint underground utilities and buried services up to 100 feet deep with accurate depth measurement to 20 feet.The Amprobe MLS55-3 Pipe transmitter is an optional accessory for the AT-3500 underground cable locator that allows for pinpointing places in pipes, ducts, etc. It can be inserted to the pipe/duct using standard fish tape or a duct rodder and can accommodate pipes over 2? (5 cm) in diameter.The Amprobe TMA-21HW Hotwire anemometer technology eliminates the use of bearings and rotating parts. When compared to standard bearing type probes, the compact Amprobe hotwire sensor is more reliable (no mechanical moving parts) and allows for easier access to duct and confined spaces. The Amprobe TMA-21HW Hotwire anemometer measures air flow volume and velocity, it features a telescopic probe for positioning the sensor, and is used by HVAC/R technicians to measure wind flow and temperature in air conditioning systems.The Amprobe SC-3500 4? Signal Clamp for AT-3500 attaches around a buried metallic pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. It does not require direct contact with metal to transmit the signal and can transmit signal through insulation on wires and into cable and wire bundles, providing more accurate tracing than locating with just a receiver and transmitter. Accommodates conductors up to 4? in diameter. Transmits a 33 kilohertz (kHz) frequency supplied by the T-3500 Transmitter (included in the AT-3500 kit).TEST LEAD SET FOR INSULATION RESISTANCE TESTERSEliminate downtime, predict the lifetime of equipment and reduce safety hazards with the Amprobe AMB-110 Insulation Resistance Tester that tests voltage and step voltage to 10,000 V. You can accurately test cables, transformers, motors, surge arrestors and generators in noisy environments such as high voltage switchyards. It also boasts built-in noise rejection filters and shielded test leads to provide high EMI immunity.
Weight10122115
Dimensions32 × 14 × 5 in7.1 × 5.3 × 3.7 in14 × 11.4 × 3.7 in9.84 × 9.84 × 9.84 inN/A14 × 10 × 15 in
Additional information
Weight 10 lbs
Dimensions 32 × 14 × 5 in
Weight 1 lbs
Dimensions 7.1 × 5.3 × 3.7 in
Weight 2 lbs
Dimensions 14 × 11.4 × 3.7 in
Weight 2 lbs
Dimensions 9.84 × 9.84 × 9.84 in
Weight 1 lbs
Weight 15 lbs
Dimensions 14 × 10 × 15 in

Related products