In Stock

Amprobe TMULD-300 Ultrasonic Leak Detector with Transmitter

Available for Quote

View List

Description

When leaks occur they often generate an ultrasonic frequency that is beyond human hearing. Amprobe?s TMULD-300 converts these sounds into an audible range for easy detection. The TMULD-300 tests pressurized air lines, refrigeration systems, and steam lines for leaks. Quickly and easily locate a leak location with this unique device.

Quick Comparison

SettingsAmprobe TMULD-300 Ultrasonic Leak Detector with Transmitter removeAmprobe AT-7020 Advanced Wire Tracer Kit removeAmprobe AT-6000-T Transmitter removeAmprobe AMB-KIT1 Test Lead Set removeAmprobe AMB-110 Industrial High-Voltage Insulation Tester removeAmprobe MLS55-3 Pipe Transmitter for AT-3500 remove
Image
SKUN_Amprobe TMULD-300N_Amprobe AT-7020N_Amprobe AT-6000-TN_Amprobe AMB-KIT1N_Amprobe AMB-110_EBN_Amprobe MLS55-3
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
ContentWhen leaks occur they often generate an ultrasonic frequency that is beyond human hearing. Amprobe?s TMULD-300 converts these sounds into an audible range for easy detection. The TMULD-300 tests pressurized air lines, refrigeration systems, and steam lines for leaks. Quickly and easily locate a leak location with this unique device.The AT-7020 Advanced Wire Tracer kit includes the AT-7000-R Receiver and the AT-7000-T Transmitter. The Receiver includes Amprobe?s patented Smart Sensor feature to instantly display the location and orientation of energized wires in walls, floors, and ceilings. You can clearly see the direction of the wire on the large, bright TFT LCD full color display. In hard-to-reach areas, you can use the Receiver?s Tip Sensor to trace wires in corners, tight spaces and junction boxes. The Transmitter offers two automatically-selected frequency modes for optimal tracing on energized and de-energized circuits, and three power modes (high, low, clamp) for a variety of environments. The breaker mode?s Scan and Locate feature identifies the one correct breaker or fuse with the highest recorded signal, thus eliminating the confusion of multiple false positives common with older technology tracing tools. So whether you?re a novice user or an expert, this Amprobe circuit tracer kit will help you get the job done fast.The AT-6000-T Transmitter works on Energized and De-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments and features high signal, low signal, and loop modes. The Breaker Identification feature eliminates confusion of multiple false positives, common with older technology tracing tools, by identifying the one correct breaker or fuse with the highest recorded signal.TEST LEAD SET FOR INSULATION RESISTANCE TESTERSEliminate downtime, predict the lifetime of equipment and reduce safety hazards with the Amprobe AMB-110 Insulation Resistance Tester that tests voltage and step voltage to 10,000 V. You can accurately test cables, transformers, motors, surge arrestors and generators in noisy environments such as high voltage switchyards. It also boasts built-in noise rejection filters and shielded test leads to provide high EMI immunity.The Amprobe MLS55-3 Pipe transmitter is an optional accessory for the AT-3500 underground cable locator that allows for pinpointing places in pipes, ducts, etc. It can be inserted to the pipe/duct using standard fish tape or a duct rodder and can accommodate pipes over 2? (5 cm) in diameter.
Weight3511151
Dimensions12.3 × 10.4 × 5.7 in17.3 × 14.3 × 8.8 in9.5 × 6.5 × 1.75 inN/A14 × 10 × 15 in7.1 × 5.3 × 3.7 in
Additional information
Weight 3 lbs
Dimensions 12.3 × 10.4 × 5.7 in
Weight 5 lbs
Dimensions 17.3 × 14.3 × 8.8 in
Weight 1 lbs
Dimensions 9.5 × 6.5 × 1.75 in
Weight 1 lbs
Weight 15 lbs
Dimensions 14 × 10 × 15 in
Weight 1 lbs
Dimensions 7.1 × 5.3 × 3.7 in