In Stock

Amprobe AMB-55 Industrial High-Voltage Insulation Tester

Available for Quote

View List

Description

Eliminate downtime, predict the lifetime of equipment and reduce safety hazards with the Amprobe AMB-55 Insulation Resistance Tester that tests voltage and step voltage to 5,500 V. You can accurately test cables, transformers, motors, surge arrestors and generators in noisy environments such as high voltage switchyards. It also boasts built-in noise rejection filters and shielded test leads to provide high EMI immunity

Quick Comparison

SettingsAmprobe AMB-55 Industrial High-Voltage Insulation Tester removeAmprobe TMA40-A Datalogging Anemometer removeAmprobe AT-6000-T Transmitter removeAmprobe SC-3500 4? Signal Clamp for AT-3500 removeAmprobe LM-120 Light Meter removeAmprobe AMB-KIT1 Test Lead Set remove
Image
SKUN_Amprobe AMB-55N_Amprobe TMA40-AN_Amprobe AT-6000-TN_Amprobe SC-3500N_Amprobe LM-120N_Amprobe AMB-KIT1
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
ContentEliminate downtime, predict the lifetime of equipment and reduce safety hazards with the Amprobe AMB-55 Insulation Resistance Tester that tests voltage and step voltage to 5,500 V. You can accurately test cables, transformers, motors, surge arrestors and generators in noisy environments such as high voltage switchyards. It also boasts built-in noise rejection filters and shielded test leads to provide high EMI immunityThe Amprobe TMA40-A provides three measurements in one: Air Velocity or volume, Relative Humidity and Temperature. With three ways to view your measurement results. Choose between single point measurement, multiple points up to 99, or the added feature of data logging up to 2400 data points. User sets the measurement interval time from 1 to 200 seconds. The TMA40-A has a flexible cord to position vane where you need to measure. For accurate CFM results, the user simply inputs the area of the air source. TMA40-A ships with USB interface cable, Software CD, hard carrying case and user manual.The AT-6000-T Transmitter works on Energized and De-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments and features high signal, low signal, and loop modes. The Breaker Identification feature eliminates confusion of multiple false positives, common with older technology tracing tools, by identifying the one correct breaker or fuse with the highest recorded signal.The Amprobe SC-3500 4? Signal Clamp for AT-3500 attaches around a buried metallic pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. It does not require direct contact with metal to transmit the signal and can transmit signal through insulation on wires and into cable and wire bundles, providing more accurate tracing than locating with just a receiver and transmitter. Accommodates conductors up to 4? in diameter. Transmits a 33 kilohertz (kHz) frequency supplied by the T-3500 Transmitter (included in the AT-3500 kit).The Amprobe LM-120 light meter measures the visible light from fluorescent, metal halide, high-pressure sodium or incandescent sources. It is a portable, easy-to-use digital light meter designed for simple one-hand operation reading in Lumen (lux) or foot candle (fc) units. The LM-120 measures a wide range of light up to 20,000 fc or 200,000 lux with an accurate, high resolution of 0.01 fc/lux. This unit is Auto-ranging plus manual ranging with ability to Zero out the reading before taking a measurement.TEST LEAD SET FOR INSULATION RESISTANCE TESTERS
Weight1521211
Dimensions17.3 × 5.8 × 13 in3.3 × 14.5 × 9 in9.5 × 6.5 × 1.75 in9.84 × 9.84 × 9.84 in4 × 10 × 2 inN/A
Additional information
Weight 15 lbs
Dimensions 17.3 × 5.8 × 13 in
Weight 2 lbs
Dimensions 3.3 × 14.5 × 9 in
Weight 1 lbs
Dimensions 9.5 × 6.5 × 1.75 in
Weight 2 lbs
Dimensions 9.84 × 9.84 × 9.84 in
Weight 1 lbs
Dimensions 4 × 10 × 2 in
Weight 1 lbs