In Stock

Wire Mapper Pro Model CA7028 (LAN Cable Tester)

Available for Quote

The Wire Mapper Pro Model CA7028 is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTP, and SSTP cabling equipped with RJ-45 connectors and wired to either TIA568A/B ISO11801 and EN 50137, USOC or ISDN specifications. It detects open circuit pairs, shorts, crossed wires, crossed pairs, reversed pairs, split pairs and shield faults. The Model CA7028 also has the ability to identify telephone and data lines. If the main unit is plugged into an operational RJ-45 socket, it will give a continuous warning tone and display if a telephone voltage is present on any of the pins. If the Service Detect key is pressed, it will check and display telephone, 10BaseT, 100Mbit+ and token ring active service.

View List
SKU: N_AEMC CA7028 Category: Tag:

Quick Comparison

SettingsWire Mapper Pro Model CA7028 (LAN Cable Tester) removeClamp-on Meter Model CM605 (100AAC/DC, Low Current) removeDigital FlexProbe® Model 4000D-14 w/6' Lead (TRMS, 40AAC, 400AAC, 4000AAC) removeClamp-on Meter Model 675 (Dual Display, TRMS, AC/DC Amps & Volts, Ohms, Continuity, Frequency & Temperature) removeClamp-on Meter Model 603 (TRMS, 1000VAC/DC, 2000AAC/3000ADC, Ohms, Continuity, Temperature) removeAEMC 6527 4G Ohm, 250V/500V/1000V Digital Megohmmeter remove
Image
SKUN_AEMC CA7028N_AEMC CM605N_AEMC 4000D-14N_AEMC 675N_AEMC 603N_AEMC 6527
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionThe Wire Mapper Pro Model CA7028 is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTP, and SSTP cabling equipped with RJ-45 connectors and wired to either TIA568A/B ISO11801 and EN 50137, USOC or ISDN specifications. It detects open circuit pairs, shorts, crossed wires, crossed pairs, reversed pairs, split pairs and shield faults. The Model CA7028 also has the ability to identify telephone and data lines. If the main unit is plugged into an operational RJ-45 socket, it will give a continuous warning tone and display if a telephone voltage is present on any of the pins. If the Service Detect key is pressed, it will check and display telephone, 10BaseT, 100Mbit+ and token ring active service.The Model CM605 is a versatile device that is capable of measuring both AC/DC voltage (up to 600V) and AC/DC current up to 100 Amps. It can also measure resistance up to 10k? and includes a continuity buzzer to assist in circuit verification. The Multifunction Clamp-on Meter Model CM605 is a good choice for both process and general industrial applications. It can detect milliamp process signals, as well as the higher currents up to 100A associated with general industrial monitoring and troubleshooting. For operator convenience, the Model CM605 can also hold the last reading in the display and capture the peak value at the time of the measurement.Clamp-on Meter Model 675 is a general purpose professional instrument that measures up to the toughest standards. This meter offers a complete set of measurement ranges, AC and DC current, AC and DC voltage, resistance, continuity with beeper, frequency from V or A, and temperature. It is in compliance with international safety and quality standards to ensure professional and reliable measuring tools. This meter is designed to measure and display amps and volts at the same time. It also is auto-ranging and provides the best measurement range and resolution for troubleshooting.
Content
Weight996992
Dimensions5 × 5 × 5 in6 × 6 × 12 in6 × 6 × 12 in6 × 6 × 12 in6 × 6 × 12 in10 × 5 × 5 in
Additional information
Weight 9 lbs
Dimensions 5 × 5 × 5 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 6 lbs
Dimensions 6 × 6 × 12 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 2 lbs
Dimensions 10 × 5 × 5 in