In Stock

Amprobe A2202 Clamp-on Transmitter Accessory for AT-4005CON and AT-4004CON Advanced Wire Tracer

Available for Quote

View List
SKU: N_Amprobe A2202 Category: Tag:

Description

The Amprobe A2202 Clamp-on transmitter will allow non-contact signal indication onto energized or non-energized conductors. On energized lines, the signal will propagate downstream to the end of the circuit, provided there is a current flowing in the circuit. Unenergized lines must be grounded at both ends or made into a complete circuit.

Quick Comparison

SettingsAmprobe A2202 Clamp-on Transmitter Accessory for AT-4005CON and AT-4004CON Advanced Wire Tracer removeAmprobe E27 Light Check Adapter removeAmprobe AM-560 Advanced HVAC Multimeter removeAmprobe ALC-110 Leakage Current Clamp removeAmprobe AMP-330 1000A AC/DC TRMS Motor Maintenance Clamp Meter with a NIST-Traceable Calibration Certificate with Data removeAmprobe AC68C TRMS 600 A Clamp Meter remove
Image
SKUN_Amprobe A2202N_Amprobe ADPTR-E27N_Amprobe AM-560N_Amprobe ALC-110N_Amprobe AMP-330N_Amprobe AC68C
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
ContentThe Amprobe A2202 Clamp-on transmitter will allow non-contact signal indication onto energized or non-energized conductors. On energized lines, the signal will propagate downstream to the end of the circuit, provided there is a current flowing in the circuit. Unenergized lines must be grounded at both ends or made into a complete circuit.Durable and compact, the Amprobe ADPTR-E27 Light-Check Adapter provides a reliable attachment of test leads to an outlet. The adapter keeps a meter connected, hands-free without accidentally shorting the circuit.The AM-560 autoranging digital multimeter is specifically designed for advanced HVAC applications. This HVAC multimeter offers a full set of professional digital multimeter features to measure a complete range of electrical parameters and key functions for HVAC applications. Dual thermocouples take differential temperature measurements; a low pass filter enhances accuracy on variable frequency drive measurements; and capacitance can be used to check motor startup capacitors. The AM-560 also features micro amps for flame sensor troubleshooting, non-contact voltage detection, and a CAT IV safety ratingPrevent unplanned downtime by detecting leakage currents with the ALC-110 Leakage Current Clamp. Rated CAT III 600 V to ensure electrical safety, the ALC-110 is designed to resist external magnetic fields for highly accurate readings. Features TRMS, a mechanical jaw lock, max readings and hold functions, highest resolution of 0.001 mA (measure up to 60 A), broad frequency range (15 Hz to 1 kHz), selectable filters (low pass, appliance, no filter), selectable limits (0.25 mA, 0.5 mA, 3.5 mA, 10 mA, 12 mA) and a battery-saving design.If you?re looking for a versatile clamp-on amp meter for electrical motor maintenance and HVAC testing in high voltage industrial environments, the AMP-330 Clamp Meter is the best clamp meter for the job. It is the best clamp meter in the AMP-300 Series line including all the features of the AMP-320 plus a work light, peak hold, CAT IV 600 V, CAT III 1000 V safety rating and large 2.0 inch (51 mm) jaw. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC/DC current, AC/DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, and continuity.Amprobe AC68C TRMS 600 A Clamp Meter measures non-linear load current with true-rms readings. This top-of-the-line professional clamp DMM is CAT II 600 V, CAT III 300 V rated.
Weight213222
Dimensions9.7 × 6.5 × 3.7 in6.38 × 3.43 × 1.73 in12.3 × 7.8 × 4.5 in14 × 7.8 × 3.5 in11.77 × 6.85 × 2.99 in10 × 5 × 5 in
Additional information
Weight 2 lbs
Dimensions 9.7 × 6.5 × 3.7 in
Weight 1 lbs
Dimensions 6.38 × 3.43 × 1.73 in
Weight 3 lbs
Dimensions 12.3 × 7.8 × 4.5 in
Weight 2 lbs
Dimensions 14 × 7.8 × 3.5 in
Weight 2 lbs
Dimensions 11.77 × 6.85 × 2.99 in
Weight 2 lbs
Dimensions 10 × 5 × 5 in