| Content | | The Amprobe TL35B test lead set contains two polyvinyl chloride (PVC) insulation lead wires with two threaded probe tips and two threaded alligator clips for connecting a compatible electrical test meter to a device in electrical testing applications. The lead wires are 40-inches and have standard probe tips that are held against the conductor during testing. The alligator clips (also called crocodile clips) screw onto the probe tips and have teeth that grip the conductor to provide a more secure, hands-free connection than the test probe tips. The clips have two jaws with a 0.60-inch jaw opening. The probe tips and the included alligator clips are threaded, allowing for a more secure connection than non-threaded tips and clips. The lead wires can be used with testing devices that have universal 4-millimeter jacks. | The Amprobe TL36A test lead set contains two PVC lead wires with two threaded probe tips and two threaded alligator clips for connecting a compatible electrical test meter to a device in electrical testing applications. The 48" lead wires have silicone insulation to protect hands from shock and heat. The silicone insulation resists melting in hot environments and becoming brittle in cold ones, and it maintains flexibility better than polyvinyl chloride (PVC) insulation. The lead wires have standard probe tips that are held against the conductor during testing. The alligator clips (also called crocodile clips) screw onto the probe tips and have teeth that grip the conductor to provide a more secure, hands-free connection than the test probe tips. The clips are 2.67" long and have a 0.30" jaw opening. The probe tips and the included alligator clips are threaded, allowing for a more secure connection than non-threaded tips and clips. The lead wires can be used with testing devices that have universal 4 mm jacks. The kit meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 1,000V, which covers items used with enclosed building circuit installations (service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply). It also conforms to applicable European Conformity (CE) directives. | | The ELS2A is for use with all models of clamp meters. It enables the user of a clamp meter to measure the current on a 2-wire or 3-wire power cord to 15 A without having to cut off the plug and separate the conductors, or opening electrical boxes on 120 V lines. The ELS2A also includes a 10X current multiplier loop for increased sensitivity and accuracy of low-current measurements. | The Amprobe MLS55-3 Pipe transmitter is an optional accessory for the AT-3500 underground cable locator that allows for pinpointing places in pipes, ducts, etc. It can be inserted to the pipe/duct using standard fish tape or a duct rodder and can accommodate pipes over 2? (5 cm) in diameter. |
| Additional information |
| Weight |
0.3 lbs |
| Dimensions |
6 × 4 × 6 in |
|
| Weight |
1 lbs |
| Dimensions |
3 × 2 × 6 in |
|
| Weight |
1 lbs |
| Dimensions |
3 × 2 × 6 in |
|
| Weight |
2 lbs |
| Dimensions |
4 × 6 × 2 in |
|
| Weight |
1 lbs |
| Dimensions |
7.9 × 5.5 × 1.2 in |
|
| Weight |
1 lbs |
| Dimensions |
7.1 × 5.3 × 3.7 in |
|
