| Content | | The AF-600 A-Frame cable ground fault finder is specifically designed for the Amprobe UAT-600 Underground Utilities Locator Series. In combination with the UAT-600 Transmitter, it will pinpoint the place where a cable metal conductor (either a sheath or a metallic conductor of the wire) touches the ground. It can also detect other conductors to ground faults such as pipeline coating defects. | The Amprobe MLS55-3 Pipe transmitter is an optional accessory for the AT-3500 underground cable locator that allows for pinpointing places in pipes, ducts, etc. It can be inserted to the pipe/duct using standard fish tape or a duct rodder and can accommodate pipes over 2? (5 cm) in diameter. | | The ELS2A is for use with all models of clamp meters. It enables the user of a clamp meter to measure the current on a 2-wire or 3-wire power cord to 15 A without having to cut off the plug and separate the conductors, or opening electrical boxes on 120 V lines. The ELS2A also includes a 10X current multiplier loop for increased sensitivity and accuracy of low-current measurements. | The Amprobe PM55A is the ultimate pocket-sized multimeter. Only 3/8? thick and less than 3 oz in weight with full functionality offering AC and DC voltage measurement to 600 V, AC and DC current to 2000 ?A, resistance to 6 Megohm, capacitance to 2000 ?F, frequency to 30 kHz, diode test and continuity with beeper. It also offers VolTect?, a built-in, non-contact voltage detection feature for AC voltages. |
| Additional information |
| Weight |
0.3 lbs |
| Dimensions |
6 × 4 × 6 in |
|
| Weight |
5 lbs |
| Dimensions |
14 × 6 × 10 in |
|
| Weight |
1 lbs |
| Dimensions |
7.1 × 5.3 × 3.7 in |
|
| Weight |
1 lbs |
| Dimensions |
5.2 × 4.1 × 1 in |
|
| Weight |
1 lbs |
| Dimensions |
7.9 × 5.5 × 1.2 in |
|
| Weight |
1 lbs |
| Dimensions |
4 × 10 × 2 in |
|
