| Description | Kikusui's new PLZ664WA Series Electronic Loads feature faster rise/fall times with variable slew rates for transient testing on high speed DC/DC convertors and DC power supplies. WA versions offer 0V inputs even at maximum rated current input enabling testing of single cell fuel cells. Test modes are constant current, constant resistance, constant voltage, constant power, or a combination of these modes. Current setting resolution can be as low as 0.1mA. Sequence function permits 10 sequence patterns to be saved in the built in memory. Battery cell discharge times from load on to load off can be measured. Other functions include soft start, short, ABC memory, set up memory, switching. PLZ4W has GPIB (SCPI compatible), RS232c and USB as standard. | The PEL-2000A Series includes two types of mainframes and 4 types of load modules to accommodate users' requirements in a flexible manner. Any load module combination can be used with a mainframe to tailor a test system based on the number of channels, and the maximum load power, voltage and current of each channel. Multiple loads can be connected in parallel to provide a higher-power load to test higher power supply outputs. This flexibility significantly reduces the investment needed for future projects that have different power requirements. The PEL-2004A is a 4-slot mainframe with a master control unit to hold 4 load modules, while PEL-2002A is a 2-slot mainframe with master control unit to hold 2 load modules. When the PEL-2004A is configured with 4 load modules rated at 350W each, the PEL-2000A series is able to sink up to 1.4kVA of power. | The PEL-2000A Series includes two types of mainframes and 4 types of load modules to accommodate users' requirements in a flexible manner. Any load module combination can be used with a mainframe to tailor a test system based on the number of channels, and the maximum load power, voltage and current of each channel. Multiple loads can be connected in parallel to provide a higher-power load to test higher power supply outputs. This flexibility significantly reduces the investment needed for future projects that have different power requirements. The PEL-2004A is a 4-slot mainframe with a master control unit to hold 4 load modules, while PEL-2002A is a 2-slot mainframe with master control unit to hold 2 load modules. When the PEL-2004A is configured with 4 load modules rated at 350W each, the PEL-2000A series is able to sink up to 1.4kVA of power. | | The Keysight 6051A electronic load mainframe accepts user-installable Keysight load modules for easy system configuration and future reconfiguration. The 6051A holds up to two 60501B, 60502B, 60503B modules, or one 60504B or 60507B module allowing up to 600 watts of total maximum power. One GPIB address is all you need for complete control and readback of all modules within a single mainframe. | 2100 W Booster Unit [for use with PEL-3111 only] |
| Additional information |
| Weight |
35 lbs |
| Dimensions |
8 × 18 × 18 in |
|
| Weight |
36 lbs |
| Dimensions |
10 × 24 × 12 in |
|
| Weight |
36 lbs |
| Dimensions |
10 × 24 × 12 in |
|
| Weight |
32 lbs |
| Dimensions |
8 × 10 × 26 in |
|
| Weight |
15 lbs |
| Dimensions |
8 × 10 × 26 in |
|
| Weight |
16 lbs |
| Dimensions |
10 × 24 × 12 in |
|
