In Stock

GW Instek PEL-001 GPIB Card for Programmable DC Electronic Load Mainframe

Available for Quote

GPIB card for PEL-2000 series

View List
SKU: N_GW Instek PEL-001 Category: Tag:

Quick Comparison

SettingsGW Instek PEL-001 GPIB Card for Programmable DC Electronic Load Mainframe removeGW Instek GPD-3303D 195W Triple-Output Programmable Linear DC Power Supply 30V , 3 A, 100mV, 10-milliamp Resolution removeGW Instek GPR-1820HD Series GPR-H Single Output Linear DC Power Supply with LED Display, 0-18V 0-20A, 360W removeInstek GPS-4303 200W Quadruple-Output Linear DC Power Supply, 30V DC, 3 Amp removeGW Instek GPR-0830HD Series GPR-H Single Output Linear DC Power Supply with LED Display, 30 Output Amps, 8 Output Volts, 240 Output Watts removeGW Instek SFG-1003 DDS Function Generator with 6 Digit LED Display, 0.1Hz to 3MHz Frequency remove
Image
SKUN_GW Instek PEL-001N_GW Instek GPC-3030DN_GW Instek GPR-1820HDN_GW Instek GPS-4303N_GW Instek GPR-0830HDN_GW Instek SFG-1003
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionGPIB card for PEL-2000 series0-30Vx2,0-3Ax2; 2.5V/3.3V/5V,3A, USB; 2 3/4 digit Three Independent Output : 30V/3A x 2, 2.5V/3.3V/5V/3A x 1 4 LED Display Sets : 3 Digits After Decimal Point Minimum Resolution : 100mV/10mA Digital Panel Control (Rotary Encoder Switch, Rubber Key With Indicator) Key-Lock User-Friendly Operation, Coarse/Fine Voltage Control 4 Panel Settings Save/Recall (Plus Factory Settings Recall) Output ON/OFF Tracking Series and Parallel Mode USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan Achieving Low Noise Warning Buzzer Light-Weight and Compact Design360W DC Linear Power Supply 0-18V, 0-20A 0-18V, 0-20A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display240W DC Linear Power Supply 0-8V, 0-30A 0-8V, 0-30A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED DisplaySFG-1000 Series, an economic function generator with high accuracy and high stability output, is designed based on the DDS (Direct Digital Synthesis) technology embedded in a large scale FPGA. The frequency range of 3MHz and the output waveform selection as Sine, Square, Triangle and TTL of SFG-1000 Series adequately provide the fundamental features to ensure high confidence for the test results. The DDS technology at an affordable price gives a high-value solution to the users who need a signal source for accurate but unsophisticated measurement applications.
Content
Weight2151515156
Dimensions6 × 8 × 4 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in15 × 12 × 6 in
Additional information
Weight 2 lbs
Dimensions 6 × 8 × 4 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 6 lbs
Dimensions 15 × 12 × 6 in