Ready to Power Up Your Design
On a bench or in a system, our power supplies are ready for your application — offering optimal choices in voltage, current, capability, and precision.
We offers more than 100 power supply products, which are suitable for the requirements of Electronic Assembly Testing, Education, Component Testing, Wireless Product Testing, Burn-in, Battery-Power Product Testing, Automotive and Aerospace industries and so on.
CHOOSE THE POWER SUPPLY THAT IS RIGHT FOR YOU
Showing 81–88 of 183 results
-
GW Instek GPR-7550D Single Output Linear DC Power Supply with LED Display, 5 Output Amps, 75 Output Volts, 375 Output Watts
Available for QuoteAdd to Cart375W DC Linear Power Supply 0-75V, 0-5A
0-75V, 0-5A
0.01% High Regulation
Constant Voltage and Constant Current Operation
Internal Select for Continuous or Dynamic Load
Low Ripple and Noise
Overload and Reverse Polarity Protection
3 1/2 Digit 0.5″ LED Display -
GW Instek PSW 30-72 Programmable Multi-Range Switching DC Power Supplies, 0-30 Volts, 0-72 Amps, 720 Watts
Available for QuoteAdd to Cart- 720W; 0-30V, 0-36A
- Voltage Rating: 30V, Output Power: 720W
- Constant Power Output for Multiple Range (V&I) Operation
- CV/CC Priority; Particularly Suitable for the Battery and LED Industry
- Adjustable Slew Rate
- Series and Parallel Operation (2 units in Series / 3 units in Parallel Maximum)
- High Efficiency and High Power Density
- 1/6 Rack Mount Size Design (EIA/JIS Standard)
- Standard Interface: LAN,USB,Analog Control Interface, GPIB-USB Adaptor(Optional)
- Labview Driver
-
Preen AFV-P-2500 15-1000Hz High Performance Programmable AC Power Source 2500VA 310Vrms 20Arms
Available for QuoteAdd to CartHigh Performance Programmable AC Power Source AFV-P-2500 15-1000Hz
Programmable AC Source 2500VA/0-310VAC/15-1000Hz
Compact and high power density: 2500VA is only 2U
AC source with DC output: extend the applications to DC testing
THD is only under 0.3 % when output power is under 100 Hz
Ideal for inrush current: capable to deliver up to 4.5 times of peak current
Start/End phase angle: users can define the start and end phase angle from 0° to 360°
Current foldback feature: have output current maintain constant based on the load which output voltage varies
STEP and RAMP function: ideal for voltage and frequency variation tests and effectively reduces the inrush current during motor startup
TRANSIENT generation provides users an easy setup for power line disturbance (PLD) simulation
Users can quickly set and view the parameters via 5 inches touch panel or rotary knob, which provides an easy operation and measurement display
Free control software and LabVIEW driver: allow users to easily program and remote -
-
GW Instek SPS-606 Switching DC Power Supply, 0-60 Volts, 0-6 Amps, 360W
Available for QuoteAdd to CartThe SPS-Series are single output, 360W, switching DC power supply. OVP protects the SPS-Series and their load from unexpected conditions. High regulation is maintained at 0.01%. Remote sensing adds an extra level of precision by compensating cable losses between loads. Turning the output On/Off from the external device is available through Remote control terminals. The GPS-Series are an ideal solution for power-efficient bench-top or portable applications requiring high regulation.
-
GW Instek PLR 20-36 DC Power Supply, 20V, 36A, 720W Low Noise
Available for QuoteAdd to CartHybrid Linear, Low noise, 0-20V/0-36A, 720W
- Output Voltage Rating： 20V
- Output Power： 720W
- Low Ripple and Noise (0.5mVrms/ 10mArms)
- Fast transition recovery time (100us)
- Maximum 2 units in series connections or 3 units in parallel connections
- Select the setting digits for voltage and current (coarse/ fine volume control)
- Panel Lock Function
- 3 set of preset function
- Output off timer function (Range: 1min to 1000hours & 59mins)
- CC priority function (prevent overshoot & inrush current)
- Sequence function of PC editing (Max.: 1000 steps/ Min. step period: 50ms)
- Protection: OVP, UVP, OCP, remote sensing (Terminal open)
- External Analog Control Function
- PC Remote Interface (Standard)： RS-232; (Optional)： GPIB / USB / LAN
- CE Compliance
-
GW Instek PSM-2010 LCD Display Programmable Dual-Range DC Power Supply, 0-20 Volts, 10 Amps, 200W
Available for QuoteAdd to CartProgrammable DC Linear Dual Range 0-8V/20A; 0-20V/10A
- 0~+8V/20A; 0~+20V/10A
- Single Output Dual Range Max. 200W
- High Resolution: 1mV/1mA
- Stable & Clear Power: 0.01% Load/Line Regulation, 350uVrms Ripple
- Auto Step running with timer setting and 100 sets Memory
- Safety Design: OVP, OCP & OTP ; Output ON/OFF Control
- Self-Test and Software Calibration
- High Visible Vacuum-Fluorescent Display
- Front and Rear Output Terminal
- LabView Driver
- Interface (Standard): RS-232, GPIB (IEEE 488.2)
-
GW Instek PSW 160-7.2 Programmable Multi-Range Switching DC Power Supplies, 0-160 Volts, 0-7.2 Amps, 360 Watts
Available for QuoteAdd to Cart- Voltage Rating: 160V, Output Power: 360W
- Constant Power Output for Multiple Range (V&I) Operation
- CV/CC Priority; Particularly Suitable for the Battery and LED Industry
- Adjustable Slew Rate
- Series and Parallel Operation (2 units in Series / 3 units in Parallel Maximum)
- High Efficiency and High Power Density
- 1/6 Rack Mount Size Design (EIA/JIS Standard)
- Standard Interface: LAN,USB,Analog Control Interface, GPIB-USB Adaptor(Optional)
- Labview Driver
