Ready to Power Up Your Design
On a bench or in a system, our power supplies are ready for your application — offering optimal choices in voltage, current, capability, and precision.
We offers more than 100 power supply products, which are suitable for the requirements of Electronic Assembly Testing, Education, Component Testing, Wireless Product Testing, Burn-in, Battery-Power Product Testing, Automotive and Aerospace industries and so on.
CHOOSE THE POWER SUPPLY THAT IS RIGHT FOR YOU
Showing 41–48 of 183 results
-
-
GW Instek ASR-2100-GPIB Programable AC and DC Power Supply AC to 350V DC to 500V 1000VA outputGPIB Interface
Available for QuoteAdd to CartThe ASR-2000 series, an AC+DC power source aiming for system integration or desktop applications, provides both rated power output for AC output and rated power output for DC output. Nine ASR-2000 output modes are available, including 1) AC power output mode (AC-INT Mode), 2) DC power output mode (DC-INT Mode), 3) AC/DC power output mode (AC+DC-INT Mode), 4) External AC signal source mode (AC-EXT Mode), 5) External AC/DC signal source mode (AC+DC-EXT Mode), 6) External AC signal superposition mode (AC-ADD Mode), 7) External AC/DC signal superposition mode (AC+DC-ADD Mode), 8) External AC signal synchronization mode (AC-SYNC Mode), 9) External AC/DC signal synchronization mode (AC+DC-SYNC Mode).
-
GW Instek SPS-1820 Switching DC Power Supply, 0-18 Volts, 0-20 Amps, 360W
Available for QuoteAdd to CartThe SPS-Series are single output, 360W, switching DC power supply. OVP protects the SPS-Series and their load from unexpected conditions. High regulation is maintained at 0.01%. Remote sensing adds an extra level of precision by compensating cable losses between loads. Turning the output On/Off from the external device is available through Remote control terminals. The GPS-Series are an ideal solution for power-efficient bench-top or portable applications requiring high regulation.
-
Agilent 6205C 0 – 40V, 0.3A / 0 – 20V, 0.6A Dual DC Power Supply
Available for QuoteAdd to CartThe Agilent HP 6205C Dual DC Power Supply is a bench supply that is equipped with ten-turn output voltage controls, volt/ampere meter, meter function/range switch, and front and rear output terminals. In addition, an output range switch permits the selection of either a high or a low output voltage range. The unit combines the versatility of a dual power supply with the flexibility of auto-parallel and auto-series operation to extend the output ratings of this supply to 20V/1.2A, 40V/0.6A, and 80V/0.3A. CV/CC, Metered, Dual Output, Regulation: 0.01%
-
Instek PLR 36-10 DC Power Supply, 36V, 10A, 360W Low Noise
Available for QuoteAdd to CartHybrid Linear, Low noise, 0-36V/0-10A, 360W
- Output Voltage Rating： 36V
- Output Power： 360W
- Low Ripple and Noise (0.5mVrms/ 10mArms)
- Fast transition recovery time (100us)
- Maximum 2 units in series connections or 3 units in parallel connections
- Select the setting digits for voltage and current (coarse/ fine volume control)
- Panel Lock Function
- 3 set of preset function
- Output off timer function (Range: 1min to 1000hours & 59mins)
- CC priority function (prevent overshoot & inrush current)
- Sequence function of PC editing (Max.: 1000 steps/ Min. step period: 50ms)
- Protection: OVP, UVP, OCP, remote sensing (Terminal open)
- External Analog Control Function
- PC Remote Interface (Standard)： RS-232; (Optional)： GPIB / USB / LAN
- CE Compliance
-
GW Instek PSS-2005GP Single Output Programmable DC Power Supply, GPIB, 0-20 Volts, 0-5 Amps, 100 Watts
Available for QuoteAdd to CartProgrammable DC Linear 0-20Vx1, 0-5Ax1, 100W WITH GPIB
- PSS 2005 Programmable DC Power Supply – GPIB Interface
- Digitized Programmable Interface
- High Resolution10mV 1mA
- High Stability, Low Drift
- Over-Voltage, Over-Current, Over-Temperature Protection
- Intelligent Fan Control (Change by Output Power)
- Built-in Buzzer Alarm
- Labview Driver
-
-
