In Stock

Instek PCS-1000I High-Precision AC/DC Current Shunt Meter

Available for Quote

GW Instek rolls out the new PCS-1000I isolated output high precision current shunt meter, which inherits the simultaneous voltage and current measurement function of PCS-1000. PCS-1000I adopts five sets of independent shunt resistors to provide five current measurement levels, including300A,30A,3A, 300mA, and 30mA to meet the requirements of different current level measurements. Internally, PCS-1000I utilizes two sets of 24bits ADCs and low temperature coefficient electronic components to mainly focus on the current measurement of power supply devices. High precision PCS-1000I can be used in adjusting and calibrating instruments. Additionally, temperature variation will not cause PCS-1000I to yield any measurement errors. PCS-1000I can automatically select optimal measurement level with the maximum resolution so as to replace manual selection to save operational time.

View List
SKU: N_GW Instek PCS-1000i Category: Tag:

Quick Comparison

SettingsInstek PCS-1000I High-Precision AC/DC Current Shunt Meter removeGW Instek GPR-7550D Single Output Linear DC Power Supply with LED Display, 5 Output Amps, 75 Output Volts, 375 Output Watts removeGW Instek PLR 20-18 DC Power Supply, 20V, 18A, 360W Low Noise removeGW Instek GPS-1830D High-Current, Single-Output DC Power Supply, 0 to 18 VDC, 0 to 3 A removeGW Instek GPS-3030D High-Current, Single-Output DC Power Supply, 0 to 30 VDC, 0 to 3 A, 90W removeInstek PSU-03B Bus Bar for 4 units in parallel operation remove
Image
SKUN_GW Instek PCS-1000iN_GW Instek GPR-7550DN_GW Instek PLR 20-18N_GW Instek GPS-1830DN_GW Instek GPS-3030DN_GW Instek PSU-03B
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionGW Instek rolls out the new PCS-1000I isolated output high precision current shunt meter, which inherits the simultaneous voltage and current measurement function of PCS-1000. PCS-1000I adopts five sets of independent shunt resistors to provide five current measurement levels, including300A,30A,3A, 300mA, and 30mA to meet the requirements of different current level measurements. Internally, PCS-1000I utilizes two sets of 24bits ADCs and low temperature coefficient electronic components to mainly focus on the current measurement of power supply devices. High precision PCS-1000I can be used in adjusting and calibrating instruments. Additionally, temperature variation will not cause PCS-1000I to yield any measurement errors. PCS-1000I can automatically select optimal measurement level with the maximum resolution so as to replace manual selection to save operational time.375W DC Linear Power Supply 0-75V, 0-5A 0-75V, 0-5A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display

Hybrid Linear, Low noise, 0-20V/0-18A, 360W

  • Output Voltage Rating: 20V
  • Output Power: 360W
  • Low Ripple and Noise (0.5mVrms/ 10mArms)
  • Fast transition recovery time (100us)
  • Maximum 2 units in series connections or 3 units in parallel connections
  • Select the setting digits for voltage and current (coarse/ fine volume control)
  • Panel Lock Function
  • 3 set of preset function
  • Output off timer function (Range: 1min to 1000hours & 59mins)
  • CC priority function (prevent overshoot & inrush current)
  • Sequence function of PC editing (Max.: 1000 steps/ Min. step period: 50ms)
  • Protection: OVP, UVP, OCP, remote sensing (Terminal open)
  • External Analog Control Function
  • PC Remote Interface (Standard): RS-232; (Optional): GPIB / USB / LAN
  • CE Compliance
54W DC Linear Power Supply 0-18V, 0-3A DIGITAL Display 0-3A DIGITAL Light and Compact Design 0.01% High Regulation Constant Voltage and Constant Current Operation Remote Control for External Programmability Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection Series or Parallel Operation

90W DC Linear Power Supply 0-30V, 0-3A DIGITAL Display

  • 0-3A DIGITAL
  • Light and Compact Design
  • 0.01% High Regulation
  • Constant Voltage and Constant Current Operation
  • Remote Control for External Programmability
  • Internal Select for Continuous or Dynamic Load
  • Low Ripple and Noise
  • Overload and Reverse Polarity Protection
  • Series or Parallel Operation
Content
Weight18151515152
Dimensions10 × 24 × 12 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in4 × 6 × 2 in
Additional information
Weight 18 lbs
Dimensions 10 × 24 × 12 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 2 lbs
Dimensions 4 × 6 × 2 in