| Description | The GLN - 5040A Two Line V - Network is used for EMI testing. It provides stable impedance for the EUT terminals and the reference ground within the conducted emissions range. The GLN - 5040A also isolates the unwanted network signals from the power supply unit and only couples the disturbance voltage of the measured device to the receiver. The product's performance is in compliance with the standard requirements of CISPR16 - 1 - 2 for V - networks with a simulated impedance of 50? H + 5 ?) || 50 ? in the frequency range of 9kHz to 30MHz. It uses standard BNC output connector with 50 ? output impedance to match any measurement devices such as receivers and spectrum analyzers. | 192W Single Channel DC Power Supply
GPE-1326 Single Channel, 192W Linear DC Power Supply
1 Independent Isolated Output
10mv min resolution 1ma min resolution
4.3 Inch LCD Display
Setting & Read back Resolution 10mA / 1mA
Output ON/OFF
Analog Control (Remote I/O) for Output ON / OFF
Set View function for checking an original V / I setting during output on
Key Lock Function
Tracking series and parallel operation
Smart cooling fan achieving low noise
Optional European Jack Type Terminal | Hybrid Linear, Low noise, 0-36V/0-10A, 360W
- Output Voltage Rating： 36V
- Output Power： 360W
- Low Ripple and Noise (0.5mVrms/ 10mArms)
- Fast transition recovery time (100us)
- Maximum 2 units in series connections or 3 units in parallel connections
- Select the setting digits for voltage and current (coarse/ fine volume control)
- Panel Lock Function
- 3 set of preset function
- Output off timer function (Range: 1min to 1000hours & 59mins)
- CC priority function (prevent overshoot & inrush current)
- Sequence function of PC editing (Max.: 1000 steps/ Min. step period: 50ms)
- Protection: OVP, UVP, OCP, remote sensing (Terminal open)
- External Analog Control Function
- PC Remote Interface (Standard)： RS-232; (Optional)： GPIB / USB / LAN
- CE Compliance
| 217W 3 Channel DC Power Supply
GPE-3323 3 Channels, 217W Linear DC Power Supply
3 Independent Isolated Output
10mv min resolution 1ma min resolution
4.3 Inch LCD Display
Setting & Read back Resolution 10mA / 1mA
Output ON/OFF
Analog Control (Remote I/O) for Output ON / OFF
Set View function for checking an original V / I setting during output on
Key Lock Function
Tracking series and parallel operation
Smart cooling fan achieving low noise
Optional European Jack Type Terminal | | 195W, 4ch Output DC Programmable Power Supply
4 Outputs for GPD-4303S
High Resolution Display 1mV / 1mA (GPD-X303S)
CH1/CH2 Output: 30V / 3A
CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S)
CH4 Output: 5V / 1A (GPD-4303S)
Auto Series / Parallel Tracking Mode
Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight
4 Sets SAVE / RECALL panel setting
User Friendly Operation, Coarse and Fine Voltage Control
Warring Buzzer
Output On / Off Switch
USB Device for Remote Control (Baud Rate 115200 bps Maximum)
Free downloadable PC software
Smart Cooling Fan with Low Noise
Safety Design: Reverse Polarity, Overload Protection |
| Additional information |
| Weight |
12 lbs |
| Dimensions |
23 × 18 × 11 in |
|
| Weight |
15 lbs |
| Dimensions |
20 × 15 × 11 in |
|
| Weight |
15 lbs |
| Dimensions |
18 × 12 × 10 in |
|
| Weight |
15 lbs |
| Dimensions |
18 × 12 × 10 in |
|
| Weight |
15 lbs |
| Dimensions |
18 × 12 × 10 in |
|
| Weight |
18 lbs |
| Dimensions |
22 × 15 × 12 in |
|
