| Description | For conduction measurements, there is a lot of leakage current due to the nature of the artificial mains network design principal. The network must be well grounded, otherwise a potential safety hazard may exist. For actual measurements, isolated transformers are always needed to avoid dangerous conditions. With a 900VA operation capacity, 5A current limit with a built-in air switch, the GIT-5060 isolated transformer is able to meet most measurement requirements. | GW Instek launches new economical safety testers, the GPT-9600 Series, which offers an affordable solution for supporting routine tests of major items of the safety standards such as IEC, EN, UL, CSA, GB, JIS and other safety regulations. The GPT-9600 Series is built upon a platform of 100VA AC maximum power output. The GPT-9602 is capable of performing AC and DC withstanding test. The GPT-9600 Series is equipped with the high-efficiency PWM amplifier, which is the core of the platform design to impede the influence from the input AC voltage fluctuation and ensure a stable voltage output. | | The GPT-9800 Series Electrical Safety Tester, with high durability and multiple user-protection design, look to meet the test requirements of a variety of safety standards, such as IEC, EN, UL, CSA, GB, JIS, and other safety-related tests for the electronic products and components. The GPT-9801 is able to perform AC withstanding test. The series of safety tester is built upon a high-efficiency PWM amplifier platform with AC 200VA maximum output capacity to impede the influence from the voltage fluctuation of the input AC source. This ensures a stable voltage supply for all the tests of the GPT-9800 Series. | GW Instek presents a dedicated option, multiplex scanner box, for specific safety tester series. This multiplex scanner box, GSB-01/02, has a function that distributes the test voltage or current provided by the GPT-9800/9900/9900A series to multiple test points. Up to eight channels can be used for outputs on one scanner. Operator can conduct AC/DC withstanding, insulation resistance and ground bond test on test points depending selected scanner model. Furthermore, up to four scanners can be connected to the tester, allowing a maximum of 32 channels. These features ensure highly reliable and labor-saving for electrical and electronic equipment with multiple test points. | The GPT-9000 Series supports the major test items among all the needed for the compliance of the safety standards such as IEC, EN, UL, CSA, GB, JIS and other safety regulations. The GPT-9904 is capable of performing both AC and DC withstanding tests. The GPT-9900 series safety tester follows every good feature and advantage of the GPT-9800 series. The high-efficiency PWM amplifier is the core of GPT-9900 platform design to impede the influence from the voltage fluctuation of input AC source. The output voltage is automatically cut off (within 150?s) upon the detection of an abnormal output voltage or a trip of current limits during test to protect the operator from hazardous injury. The GPT-9900 series automatically discharges the DUT after each test to eliminate excessive voltage that remains on the DUT. |
| Additional information |
| Weight |
25 lbs |
| Dimensions |
15 × 22 × 8 in |
|
| Weight |
25 lbs |
| Dimensions |
20 × 18 × 11 in |
|
| Weight |
2 lbs |
| Dimensions |
9 × 7 × 1 in |
|
| Weight |
25 lbs |
| Dimensions |
20 × 18 × 11 in |
|
| Weight |
15 lbs |
| Dimensions |
8 × 20 × 15 in |
|
| Weight |
25 lbs |
| Dimensions |
20 × 18 × 11 in |
|
