| Content | | | The Amprobe TL35B test lead set contains two polyvinyl chloride (PVC) insulation lead wires with two threaded probe tips and two threaded alligator clips for connecting a compatible electrical test meter to a device in electrical testing applications. The lead wires are 40-inches and have standard probe tips that are held against the conductor during testing. The alligator clips (also called crocodile clips) screw onto the probe tips and have teeth that grip the conductor to provide a more secure, hands-free connection than the test probe tips. The clips have two jaws with a 0.60-inch jaw opening. The probe tips and the included alligator clips are threaded, allowing for a more secure connection than non-threaded tips and clips. The lead wires can be used with testing devices that have universal 4-millimeter jacks. | The ELS2A is for use with all models of clamp meters. It enables the user of a clamp meter to measure the current on a 2-wire or 3-wire power cord to 15 A without having to cut off the plug and separate the conductors, or opening electrical boxes on 120 V lines. The ELS2A also includes a 10X current multiplier loop for increased sensitivity and accuracy of low-current measurements. | ACD-50NAV clamp-on power meter offers AC current measurements to 600 A, AC/DC voltage to 1000 V, and wide jaws to accommodate large conductors. This clamp-on multimeter is ideal for industrial power monitoring and verifying system conditions. | Replacement Fuse for HD110C and HD160C Multimeter, 2Amp/1500V |
| Additional information |
| Weight |
0.3 lbs |
| Dimensions |
7 × 3 × 2 in |
|
|
| Weight |
1 lbs |
| Dimensions |
3 × 2 × 6 in |
|
| Weight |
1 lbs |
| Dimensions |
7.9 × 5.5 × 1.2 in |
|
| Weight |
1 lbs |
| Dimensions |
15.8 × 11.2 × 7.6 in |
|
| Weight |
0.5 lbs |
| Dimensions |
3.5 × 3.5 × 0.4 in |
|
