In Stock

GW Instek GDM-SC1 Scanner Card for GDM-8261A Digital Bench Top Multimeter

Available for Quote

View List
Add to wishlist
SKU: N_GW Instek GDM-SC1 Category: Tag:

Description

The optional scanner card (GDM-SC1), creates a self-contained multi-point measurement solution with plug-in design. This approach eliminates the complexities of multi-point measurements and data processing. The scanner lets users effectively measure multiple channels connected to a single GDM-8255A.

Quick Comparison

SettingsGW Instek GDM-SC1 Scanner Card for GDM-8261A Digital Bench Top Multimeter removeGW Instek SFG-1003 DDS Function Generator with 6 Digit LED Display, 0.1Hz to 3MHz Frequency removeInstek PSU-03B Bus Bar for 4 units in parallel operation removeGW Instek Cal Calibration Key for GDM-8255A/8251A removeInstek GPD-4303S 200W Quadruple-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp, 1mV, 1-milliamp Resolution removeGW Instek GDM-8341 Dual Measurement Multimeter with USB Device, 50,000 Count by GW Instek remove
Image
SKUN_GW Instek GDM-SC1N_GW Instek SFG-1003N_GW Instek PSU-03BN_GW Instek GDM-01N_GW Instek GPD-4303SN_GW Instek GDM-8341
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionSFG-1000 Series, an economic function generator with high accuracy and high stability output, is designed based on the DDS (Direct Digital Synthesis) technology embedded in a large scale FPGA. The frequency range of 3MHz and the output waveform selection as Sine, Square, Triangle and TTL of SFG-1000 Series adequately provide the fundamental features to ensure high confidence for the test results. The DDS technology at an affordable price gives a high-value solution to the users who need a signal source for accurate but unsophisticated measurement applications.195W, 4ch Output DC Programmable Power Supply 4 Outputs for GPD-4303S High Resolution Display 1mV / 1mA (GPD-X303S) CH1/CH2 Output: 30V / 3A CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S) CH4 Output: 5V / 1A (GPD-4303S) Auto Series / Parallel Tracking Mode Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight 4 Sets SAVE / RECALL panel setting User Friendly Operation, Coarse and Fine Voltage Control Warring Buzzer Output On / Off Switch USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan with Low Noise Safety Design: Reverse Polarity, Overload Protection
ContentThe optional scanner card (GDM-SC1), creates a self-contained multi-point measurement solution with plug-in design. This approach eliminates the complexities of multi-point measurements and data processing. The scanner lets users effectively measure multiple channels connected to a single GDM-8255A.GW INSTEK rolls out the new generation Dual Measurement Multimeter -- the GDM-834x series, which has two models -GDM-8341 and GDM 8342. Its exceptional features include 50,000 counts, VFD dual-display, 0.02% basic DC voltage accuracy and a USB protocol connector to provide users with measurement precision, lucid data observation, and the convenience to connect with the personal computer. The GDM-834x series not only supports the fundamental measurement items provided by general multimeters, but also equips with capacitance and temperature measurement functions. Furthermore, the GDM-834x series also provides many auxiliary functions to meet the measurement requirements for manufacturing process tests, educational experiments and testing facilities.
Weight1620.5186
Dimensions9.6 × 6.5 × 1.7 in15 × 12 × 6 in4 × 6 × 2 in4 × 3 × 0.5 in22 × 15 × 12 in17.5 × 13.5 × 7.5 in
Additional information
Weight 1 lbs
Dimensions 9.6 × 6.5 × 1.7 in
Weight 6 lbs
Dimensions 15 × 12 × 6 in
Weight 2 lbs
Dimensions 4 × 6 × 2 in
Weight 0.5 lbs
Dimensions 4 × 3 × 0.5 in
Weight 18 lbs
Dimensions 22 × 15 × 12 in
Weight 6 lbs
Dimensions 17.5 × 13.5 × 7.5 in

Related products