Content | The Amprobe A2202 Clamp-on transmitter will allow non-contact signal indication onto energized or non-energized conductors. On energized lines, the signal will propagate downstream to the end of the circuit, provided there is a current flowing in the circuit. Unenergized lines must be grounded at both ends or made into a complete circuit. | Small size doesn?t mean small features. The Amprobe AMP-25 Mini-Clamp is pocket-sized, enabling quick and easy spot checks of electrical systems. With its rugged construction and CAT III 600 V rating, the AMP-25 is a must-have professional troubleshooting tool for commercial electricians and electrical contractors. The AMP-25 is designed to measure AC/DC load current and inrush current for motors. Essential features like True-RMS, non-contact voltage and low pass filter make this clamp stand tall next to clamps twice its size. With the AMP-25, you never have to sacrifice performance for size. | This CAT IV rated ACD-3300 IND Clamp On Tester is ideal for industrial applications and utilities that require an extra level of safety. Including True-rms sensing for accuracy, this clamp on meter?s extra large jaws can clamp on to those wide diameter wires making taking measurements in industrial environments simple. | The AF-600 A-Frame cable ground fault finder is specifically designed for the Amprobe UAT-600 Underground Utilities Locator Series. In combination with the UAT-600 Transmitter, it will pinpoint the place where a cable metal conductor (either a sheath or a metallic conductor of the wire) touches the ground. It can also detect other conductors to ground faults such as pipeline coating defects. | Compact yet tough, the Amprobe AM-510 autoranging digital multimeter delivers rugged, accurate performance for light commercial and advanced residential applications like rewiring an electrical panel, installing heated floors and light fixtures, troubleshooting and repairing home appliances, electrical sockets, and automotive electrical problems. Its CAT III safety rating and ease of use make it ideal for high voltage multimeter applications. Innovative digital multimeter features expedite go/no-go checks, and the built-in flashlight makes it easy to see wires and fuses in the dark. Plus a rubber tilt stand and a probe holder give you a ?third-hand? when you need it. | The Amprobe ACDC-3400 clamp multimeter is CAT IV rated to add an extra level of safety for high voltage, industrial or utility testing applications. It is an AC/DC current clamp meter and a voltage meter all in one. This clamp-on electrical multimeter includes True RMS sensing for accuracy and dependability and extra large jaws to clamp around conductors up to 2? (51 mm) in diameter.
|
Additional information |
Weight |
2 lbs |
Dimensions |
9.7 × 6.5 × 3.7 in |
|
Weight |
1 lbs |
Dimensions |
9.5 × 6.5 × 1.75 in |
|
Weight |
2 lbs |
Dimensions |
12.1 × 5.7 × 3.4 in |
|
Weight |
5 lbs |
Dimensions |
14 × 6 × 10 in |
|
Weight |
2 lbs |
Dimensions |
10 × 5 × 2 in |
|
Weight |
2 lbs |
Dimensions |
12.3 × 5.5 × 3.3 in |
|