In Stock

GW Instek GPM-8310 Digital AC Power Meter with LAN/GPIB up to 100KHz

Available for Quote

Key Features

 5” TFT LCD
 DC, 0.1Hz ~ 100kHz voltage/current test bandwidth
 Two numerical display modes
 General mode: displays 2 main test items + 8 secondary test items
 Simple mode: displays the test values of 4 main test items
 Waveform display: V (voltage), I (current), P (power)
 The current/voltage can be measured to a deformed wave with CF of 3,
and the half-range CF can reach 6 or 6A
 50th order of harmonic measurement and analysis (value and bar
graph)
 Integration function supports automatic level-changing
 External current sensor input terminals (EXT1/EXT2)
 Standard interfaces: RS-232C, USB device/ host, LAN, GPIB
 Optional interface: Digital I/O (DA4) (must be installed before leaving the
factory)
 Optional accessory: GPM-001

View List
SKU: N_GW Instek GPM-8310 Category: Tag:

Quick Comparison

SettingsGW Instek GPM-8310 Digital AC Power Meter with LAN/GPIB up to 100KHz removeGW Instek GPR-7550D Single Output Linear DC Power Supply with LED Display, 5 Output Amps, 75 Output Volts, 375 Output Watts removeInstek PSU-03B Bus Bar for 4 units in parallel operation removeGW Instek GPR-0830HD Series GPR-H Single Output Linear DC Power Supply with LED Display, 30 Output Amps, 8 Output Volts, 240 Output Watts removeInstek GPD-4303S 200W Quadruple-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp, 1mV, 1-milliamp Resolution removeGW Instek GPS-3030D High-Current, Single-Output DC Power Supply, 0 to 30 VDC, 0 to 3 A, 90W remove
Image
SKUN_GW Instek GPM-8310N_GW Instek GPR-7550DN_GW Instek PSU-03BN_GW Instek GPR-0830HDN_GW Instek GPD-4303SN_GW Instek GPS-3030D
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionKey Features  5” TFT LCD  DC, 0.1Hz ~ 100kHz voltage/current test bandwidth  Two numerical display modes  General mode: displays 2 main test items + 8 secondary test items  Simple mode: displays the test values of 4 main test items  Waveform display: V (voltage), I (current), P (power)  The current/voltage can be measured to a deformed wave with CF of 3, and the half-range CF can reach 6 or 6A  50th order of harmonic measurement and analysis (value and bar graph)  Integration function supports automatic level-changing  External current sensor input terminals (EXT1/EXT2)  Standard interfaces: RS-232C, USB device/ host, LAN, GPIB  Optional interface: Digital I/O (DA4) (must be installed before leaving the factory)  Optional accessory: GPM-001375W DC Linear Power Supply 0-75V, 0-5A 0-75V, 0-5A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display240W DC Linear Power Supply 0-8V, 0-30A 0-8V, 0-30A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display195W, 4ch Output DC Programmable Power Supply 4 Outputs for GPD-4303S High Resolution Display 1mV / 1mA (GPD-X303S) CH1/CH2 Output: 30V / 3A CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S) CH4 Output: 5V / 1A (GPD-4303S) Auto Series / Parallel Tracking Mode Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight 4 Sets SAVE / RECALL panel setting User Friendly Operation, Coarse and Fine Voltage Control Warring Buzzer Output On / Off Switch USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan with Low Noise Safety Design: Reverse Polarity, Overload Protection

90W DC Linear Power Supply 0-30V, 0-3A DIGITAL Display

  • 0-3A DIGITAL
  • Light and Compact Design
  • 0.01% High Regulation
  • Constant Voltage and Constant Current Operation
  • Remote Control for External Programmability
  • Internal Select for Continuous or Dynamic Load
  • Low Ripple and Noise
  • Overload and Reverse Polarity Protection
  • Series or Parallel Operation
Content
Weight22152151815
Dimensions12 × 14 × 6 in18 × 12 × 10 in4 × 6 × 2 in18 × 12 × 10 in22 × 15 × 12 in18 × 12 × 10 in
Additional information
Weight 22 lbs
Dimensions 12 × 14 × 6 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 2 lbs
Dimensions 4 × 6 × 2 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 18 lbs
Dimensions 22 × 15 × 12 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in